SM7621

ifm electronic gmbh SM7621

Magnetic-inductive flow meter, SMN34XGXFRKG/US-100

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): SM7621
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of digital outputs: 2; Number of analog outputs: 1
Measuring range0.1...75 l/min: 0.006...4.5 m³/h: 1.2...1190 gph: 0.02...19.82 gpm
Process connectionthreaded connection 3/4" NPT Internal thread DN20
Special featuregold-plated contacts
MediaConductive liquids; water; water-based media
Note on mediaconductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C)
Medium temperature [°F]-4...194
Pressure rating16 bar: 1.6 MPa
Напряжение питания18...30 DC; (to SELV/PELV)
Current consumption [mA]< 80
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]5
Measuring principlemagnetic-inductive
Inputscounter reset
Total number of outputs2
Output signalswitching signal; analog signal; pulse signal; IO-Link; frequency signal; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / closed; (configurable)
Напряжение питания2
Permanent current rating of switching output DC [mA]100
Number of analog outputs1
Analog current output [mA]4...20; (scalable)
Max. load [Ω]500
Pulse outputflow rate meter
Short-circuit protectionyes
Type of short-circuit protectionyes (non-latching)
Overload protectionyes
Display range-90...90 l/min: -5.4...5.4 m³/h: -1426.8...1426.8 gph: -23.78...23.78 gpm
Resolution0.1 l/min: 0.006 m³/h: 0.6 gph: 0.01 gpm
Set point SP0.5...75 l/min: 0.03...4.5 m³/h: 8.4...1189 gph: 0.14...19.81 gpm
Reset point rP0.1...74.6 l/min: 0.006...4.48 m³/h: 1.2...1183 gph: 0.03...19.71 gpm
Analog start point ASP0...59.9 l/min: 0...3.6 m³/h: 0...950 gph: 0...15.82 gpm
Analog end point AEP15.1...75 l/min: 0.9...4.5 m³/h: 240...1189 gph: 3.99...19.81 gpm
Low flow cut-off LFC0.1...3.8 l/min: 0.006...0.23 m³/h: 1.8...59.4 gph: 0.03...0.99 gpm
Frequency end point, FEP15.1...75 l/min: 0.9...4.5 m³/h: 240...1189 gph: 3.99...19.81 gpm
Frequency at the end point FRP [Hz]1...10000
Pulse length [s]0.003...2
Pulse value0.01...99990000 I
Measuring range [°F]-4...194
Display range [°F]-43.6...233.6
Resolution [°F]0.1
Set point SP [°F]-3.3...194
Reset point rP [°F]-4...193.3
Analog start point [°F]-4...154.4
Analog end point [°F]35.6...194
In steps of [°F]0.1
Accuracy (in the measuring range)± (0,8 % MW + 0,2 % MEW)
Repeatability± 0,2 % MEW
Accuracy [K]± 2,5 (Q > 5 % MEW)
Start-up delay [s]0...50
Время отклика15; (Q > 10 % MEW, T09)
Damping process value dAP [s]0...5
Parameter setting optionshysteresis / window; normally open / closed; switching logic; Frequency output; current/pulse output; Start-up delay; display can be deactivated; Display unit
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesCommon - I&D: Identification and Diagnosis; Function: Measurement data, standard resolution
SIO modeyes
Required master port classA
Process data analog3
Process data binary2
Min. process cycle time [ms]8
Supported DeviceIDsType of operation: DeviceID; default: 958
Рабочая температура-4...140
Storage temperature [°F]-13...176
ProtectionIP 65; IP 67
EMCDIN EN 60947-5-9
Shock resistanceDIN IEC 68-2-27: 20 g (11 ms)
Vibration resistanceDIN IEC 68-2-6:: 5 g (10...2000 Hz)
MTTF [years]114
UL approvalUL approval number: I014; File number UL: E174189
Pressure equipment directivesound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Масса848.9
Housingrectangular
Dimensions [mm]110 x 48 x 73
Материалstainless steel (1.4408/316); stainless steel (1.4404 / 316L); PC; PBT+PC-GF30
Материалstainless steel (1.4404 / 316L); PEEK; carbon fiber PEEK; FKM
DisplayColor display 1,44", 128 x 128 pixels; 2 x LED, yellow
RemarksMW = Measured value; MEW = Final value of the measuring range
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4, gold-plated
Получить предложение по этой позиции