ifm electronic gmbh SR5900
Control monitor for flow sensors, SRM12XXBFPKG/
Категории:
Технические характеристики
| Application | Flow monitoring; Wire break monitoring |
|---|---|
| Напряжение питания | 19...36 DC |
| Current consumption [mA] | < 70 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 10 |
| Number of channels | 1 |
| Electrical design | PNP |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching function flow monitoring | output switches when flow is present: ON for output function = normally open / OFF for output function = normally closed |
| Short-circuit protection | yes |
| Overload protection | yes |
| Adjustment of the switch point | pushbuttons |
| Рабочая температура | -20...60 |
| Protection | IP 67; (with sensor attached) |
| EMC | EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated: 10 V/m; EN 61000-4-4 Burst: 2 kV; EN 61000-4-6 HF conducted: 10 V |
| Shock resistance | DIN IEC 68-2-27: 30 g (6 ms) |
| Vibration resistance | DIN IEC 68-2-6: 5 g (55...2000 Hz) |
| MTTF [years] | 342 |
| Масса | 225.5 |
| Housing | tubular |
| Dimensions [mm] | Ø 50 / L = 83 |
| Материал | stainless steel (1.4404 / 316L); stainless steel (1.4301 / 304); PC; PBT-GF20; EPDM/X; brass |
| Display | Function: LED, bar graph; Switching status: LED, orange flash in case of wire break |
| Remarks | connection for flow sensor without short-circuit protection / reverse polarity protection; The flow sensor must be directly connected to the control monitor.; A connection by means of extension cables is not allowed. |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |