SV5610

ifm electronic gmbh SV5610

SV vortex flowmeters with display for water based media, SVN12XXXIRKG/US-100

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): SV5610
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of digital outputs: 2
Measuring range32...634 gph: 0.55...10.55 gpm
Process connectionthreaded connection 1/2" NPT Internal thread DN10
Special featuregold-plated contacts
Applicationfor industrial applications
Mediawater; glycol solutions; Coolants
Pressure rating12 bar: 174 psi: 1.2 MPa
Note on pressure ratingup to 40 °C
MAWP (for applications according to CRN) [bar]4.8
Напряжение питания18...30 DC
Current consumption [mA]< 30
Min. insulation resistance [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]< 3
Measuring principleVortex
Total number of outputs2
Output signalswitching signal; frequency signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / closed; (configurable)
Напряжение питания2.5
Permanent current rating of switching output DC [mA]100
Short-circuit protectionyes
Overload protectionyes
Display range0...760 gph: 0...12.7 gpm
Resolution2 gph: 0.05 gpm
Set point SP38...634 gph: 0.65...10.55 gpm
Reset point rP32...628 gph: 0.55...10.45 gpm
Frequency end point, FEP126...634 gph: 2.1...10.55 gpm
In steps of2 gph: 0.05 gpm
Frequency at the end point FRP [Hz]100...1000
Measuring dynamics1:20
Measuring range [°F]14...194
Display range [°F]-22...230
Resolution [°F]1
Set point SP [°F]16...194
Reset point rP [°F]14...192
In steps of [°F]1
Frequency start point, FSP [°F]14...158
Frequency end point, FEP [°F]50...194
Accuracy (in the measuring range)± 2 % MEW; (water)
Repeatability± 0,5 % MEW
Accuracy [K]± 1
Время отклика1; (dAP = 0)
Damping process value dAP [s]0...5
Dynamic response T05 / T09 [s]T09 = 6
Parameter setting optionshysteresis / window; normally open / closed; switching logic; Frequency output; switch-on/switch-off delay; Damping; Display unit
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis
SIO modeyes
Required master port classA
Process data analog2
Process data binary2
Min. process cycle time [ms]3
Supported DeviceIDsType of operation: DeviceID; default: 490
Рабочая температура32...140
Рабочая температураmedium temperature < 176 °F; medium temperature < 194 °F: 32...122 °F
Storage temperature [°F]-4...176
ProtectionIP 65; IP 67
EMCDIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-27: 5 g (11 ms)
Vibration resistanceDIN EN 60068-2-6: with water / 10...50 Hz 1 mm; with water / 50...2000 Hz 2 g
MTTF [years]342
UL approvalUL approval number: I001
Pressure equipment directivesound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Масса468
Housingrectangular
Dimensions [mm]119 x 45 x 72
Материалstainless steel (1.4404 / 316L); PC; PBT+PC-GF30; PPS; TPE-U
Материалstainless steel (1.4404 / 316L); ETFE; PA 6T; PPS; FKM
Tightening torque [Nm]30
DisplayColor display 1,44", 128 x 128 pixels; 2 x LED, yellow
RemarksMW = Measured value; MEW = Final value of the measuring range
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4, gold-plated
Получить предложение по этой позиции