ifm electronic gmbh TCC911
Temperature transmitter, TCC050K1EC02-A-DKG/US
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
|---|---|
| Measuring range | -25...160 °C: -13...320 °F |
| Communication interface | IO-Link |
| Process connection | Clamp DN50 (2") DIN 32676 (ISO 2852) |
| Installation length EL [mm] | 50 |
| Special feature | gold-plated contacts |
| Measuring element | 1 x Pt 1000 |
| Reference element | 1 x NTC |
| Media | liquids and gases |
| Pressure rating | 160 bar: 16 MPa |
| Minimum installation depth [mm] | 15 |
| Напряжение питания | 18...32 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | 10; (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 6 |
| Integrated watchdog | yes |
| Total number of outputs | 2 |
| Output signal | analog signal; IO-Link; (calibration check status) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 1 |
| Output function | normally closed; (diagnostic signal) |
| Напряжение питания | 2 |
| Permanent current rating of switching output DC [mA] | 100 |
| Diagnostic output | calibration check status and error diagnostics |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20 |
| Max. load [Ω] | (Ub - 15 V) x 50 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Probe length L [mm] | 50 |
| Note on measuring range | scalable |
| Factory setting | -10...150 °C / 14...302 °F |
| Calibration check limit [K] | 0.5...3 |
| In steps of [K] | 0.05 |
| Resolution of analog output [K] | 0.05 |
| Precision analog output [K] | ± 0,2 |
| Precision IO-Link [K] | ± 0,2 |
| Temperature coefficient analog output [% of the span / 10 K] | < ± 0,02; (In case of deviation from the reference condition 25 ± 5 °C) |
| Temperature coefficient IO-Link [% of the span / 10 K] | < ± 0,01; (In case of deviation from the reference condition 25 ± 5 °C) |
| Dynamic response T05 / T09 [s] | 1,5 / 4 |
| Parameter setting options | Display unit; scaling of the analog output; calibration check limit; switching logic diagnostic output; simulation mode |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | BLOB: Binary Large Object transfer; Common - I&D: Identification and Diagnosis; Function: Measurement data, standard resolution |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 1 |
| Min. process cycle time [ms] | 4.4 |
| IO-Link resolution temperature [K] | 0.01 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1129 |
| Рабочая температура | -25...70 |
| Рабочая температура | max. internal device temperature: 125 °C |
| Storage temperature [°C] | -40...100 |
| Protection | IP 68; IP 69K |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 35 g (10...2000 Hz) |
| MTTF [years] | 329 |
| Note on approval | Factory certificate available as download at www.factory-certificate.ifm |
| UL approval | UL approval number: K021; File number UL: E217884 |
| Масса | 408.2 |
| Housing | tubular |
| Dimensions [mm] | Ø 50 / L = 114.8 |
| Материал | stainless steel (1.4404 / 316L); PEI; FKM; PFA |
| Материал | stainless steel (1.4404 / 316L); PEEK |
| Suitable for process connections in accordance with the standards | DIN 32676 series A (DIN): clamp DN50; DIN 32676 series B (ISO): clamp DN42,4, DN48,3; DIN 32676 series C (ASME BPE): clamp 2"; ISO 2852: clamp DN40, DN51 |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.8 µm |
| Probe diameter [mm] | 6 |
| Remarks | MS = set measuring span; cULus - Class 2 source required |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |