TD2833

ifm electronic gmbh TD2833

Temperature Transmitter with Display, TD-100FFEC01-A-ZVG/US

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): TD2833
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of analog outputs: 1
Measuring range-50...150 °C: -58...302 °F
Communication interfaceIO-Link
Process connectionClamp DN25...DN40 (1...1,5") DIN 32676 (ISO 2852)
Installation length EL [mm]100
Measuring element1 x Pt 1000; (to DIN EN 60751, class A)
Medialiquids and gases
Pressure rating100 bar: 10 MPa
Vacuum resistance-1000 mbar: -0.1 MPa
MAWP (for applications according to CRN) [bar]60
Напряжение питания18...32 DC; (cULus - Class 2 source required)
Current consumption [mA]< 50
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]2
Total number of outputs1
Output signalanalog signal; IO-Link; (configurable)
Number of analog outputs1
Analog current output [mA]4...20
Max. load [Ω]300
Short-circuit protectionyes
Overload protectionyes
Probe length L [mm]100
Factory setting0...300 °F
Resolution of analog output [K]0.04
Resolution of display [K]0.28
Precision analog output [K]± 0,3 + (± 0,1 % MS)
Temperature coefficient [% of the span / 10 K]0,1; (In case of deviation from the reference condition 25 °C)
Dynamic response T05 / T09 [s]1 / 3
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
ProfilesSmart Sensor - SSP 0: Generic Profiled Sensor
Min. process cycle time [ms]2.3
Supported DeviceIDsType of operation: DeviceID; default: 376
Рабочая температура-25...80
Storage temperature [°C]-40...100
ProtectionIP 67; IP 68; IP 69K
EMCDIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistanceDIN IEC 68-2-27: 50 g (11 ms)
Vibration resistanceDIN IEC 68-2-6: 10 g (10...2000 Hz)
Note on approvalFactory certificate available as download at www.factory-certificate.ifm
UL approvalUL approval number: K001
Масса337.5
Housingtubular
Dimensions [mm]Ø 50.5 / L = 169.4
Материалstainless steel (1.4404 / 316L); PEI; FKM
Материалstainless steel (1.4404 / 316L) electropolished
Surface characteristics Ra/Rz of the wetted partsRa < 0.8 µm
Probe diameter [mm]6
Display7-segment LED display, 4-digit; Display unit / status, °C / °F
RemarksMS = set measuring span; The values for accuracy apply to flowing water.
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4
Получить предложение по этой позиции