ifm electronic gmbh TN2343
Temperature sensor with display, TN-150KLBN12-MFRKG/US/
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
|---|---|
| Measuring range | -50...150 °C: -58...302 °F |
| Communication interface | IO-Link |
| Process connection | threaded connection 1/2" NPT external thread |
| Installation length EL [mm] | 150 |
| Special feature | gold-plated contacts |
| Measuring element | 1 x Pt 1000; (to DIN EN 60751, class A) |
| Media | liquids and gases |
| Pressure rating | 250 bar: 25 MPa |
| Напряжение питания | 18...32 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 1 |
| Integrated watchdog | yes |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 250 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20 |
| Max. load [Ω] | 500 |
| Напряжение питания | 0...10 |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Probe length L [mm] | 133.4 |
| Factory setting | 0...300 °F |
| Set point SP | -49.8...150 °C: -57.6...302 °F |
| Reset point rP | -50...149.8 °C: -58...301.6 °F |
| Analog start point | -50...145 °C: -58...293 °F |
| Analog end point | -45...150 °C: -49...302 °F |
| In steps of | 0.1 °C: 0.1 °F |
| Resolution of switching output [K] | 0.1 |
| Resolution of analog output [K] | current output: MS / 4096; voltage output: MS / 3561 |
| Resolution of display [K] | 0.1 |
| Switch point accuracy [K] | ± 0,3 + (± 0,1 % MS) |
| Precision analog output [K] | ± 0,3 + (± 0,1 % MS) |
| Display accuracy [K] | ± 0,3 + (± 0,1 % MS) |
| Temperature coefficient [% of the span / 10 K] | 0,1; (In case of deviation from the reference condition 25 ± 5 °C) |
| Dynamic response T05 / T09 [s] | 1 / 3; (according to DIN EN 60751) |
| Parameter setting options | hysteresis / window; normally open / closed; switching logic; switch-on/switch-off delay; Damping; Display unit; current/voltage output |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| Min. process cycle time [ms] | 2.3 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 707 |
| Рабочая температура | -25...80 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67 |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN IEC 68-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 207 |
| UL approval | UL approval number: K015 |
| Масса | 304.5 |
| Housing | tubular |
| Dimensions [mm] | Ø 34 / L = 242 |
| Материал | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC |
| Материал | stainless steel (1.4404 / 316L) |
| Probe diameter [mm] | 6 |
| Display | Display unit: 2 x LED, green; Switching status: 2 x LED, yellow; Measured values: alphanumeric display, red/green 4-digit |
| Remarks | MS = set measuring span; The values for accuracy apply to flowing water. |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |