ifm electronic gmbh UGT525
Ultrasonic sensor, UGB00800EOKG/IO-Link/US
Категории:
Технические характеристики
| Electrical design | PNP |
|---|---|
| Output function | normally open / closed; (configurable) |
| Sensing range [mm] | 60...800; (Target: 200 x 200 mm) |
| Communication interface | IO-Link |
| Housing | Threaded type |
| Dimensions [mm] | M18 x 1 / L = 60.5 |
| Напряжение питания | 10...30 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | < 35 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | < 0.3 |
| Converter frequency [kHz] | 230 |
| Number of inputs and outputs | Number of digital outputs: 1 |
| Synchronization input | no |
| Multiplex input | no |
| Total number of outputs | 1 |
| Number of digital outputs | 1 |
| Напряжение питания | 2.2 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 5 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Blind zone [mm] | 60 |
| Angle of aperture cylindrical [°] | 15; (±2) |
| Max. deviation from the 90° angle sensor/object [°] | ± 4 |
| Temperature compensation | yes |
| Hysteresis [%] | < 1 |
| Switch-point drift [%] | -2...2 |
| Repeatability | <0,7 % |
| Resolution [mm] | 1 |
| Notes on the accuracy / deviation | The indicated values are reached after a warm-up time of min. 20 minutes |
| Parameter setting options | hysteresis / window; second switch point; Switch-on and switch-off delay; switch-on operations; Teach function; light-on/dark-on mode |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Multiple switching signal; Function: Process data variable; Function: Device diagnosis; Function: Teach channel |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 10 |
| IO-Link process data (cyclical) | Function: bit length; process value: 16; device status: 4; binary switching information: 2 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter |
| Supported DeviceIDs | Type of operation: DeviceID; default: 890 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Рабочая температура | -20...70 |
| Storage temperature [°C] | -30...80 |
| Protection | IP 67 |
| EMC | EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated: 3 V/m; EN 61000-4-4 Burst: 2 kV; EN 61000-4-6 HF conducted: 3 V; EN 55011: class A |
| Vibration resistance | EN 60068-2-6 Fc: (10-55) Hz 1 mm amplitude, vibration duration 5 min., 30 min. per axis with resonance or 55 Hz |
| Shock resistance | EN 60068-2-27 Ea: 30 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
| MTTF [years] | 209 |
| UL approval | Ta: -20...70 °C; voltage supply: Class 2; File number UL: E174191 |
| Масса | 79 |
| Thread designation | M18 x 1 |
| Материал | stainless steel (1.4404 / 316L); PA; epoxy glass ceramics |
| Tightening torque [Nm] | 50 |
| Display | Switching status: 1 x LED, yellow; echo: 1 x LED, green |
| Items supplied | lock nuts: 2 x M18, stainless steel |
| Remarks | cULus - Class 2 source required |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |