ifm electronic gmbh VVB301
Vibration sensor, VIBRATION IO-LINK SWITCH
Технические характеристики
| Frequency range [Hz] | 2...5600 |
|---|---|
| Measuring principle | capacitive |
| Design | Basic condition monitoring |
| Application | industrial machines |
| Напряжение питания | 18...30 DC |
| Current consumption [mA] | < 50 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Type of sensor | Microelectromechanical system (MEMS) |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Output signal | switching signal; IO-Link |
| Electrical design | PNP/NPN; (configurable) |
| Number of digital outputs | 2 |
| Output function | normally open / closed |
| Напряжение питания | 2 |
| Max. current load per output [mA] | 100 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Note on setpoint SP | configurable |
| Number of measurement axes | 3 |
| Measuring range of vibration [m/s] | 0...0.3 |
| Resolution [m/s] | 0.0001 |
| Set point SP [m/s] | 0.0002...0.3 |
| Reset point rP [m/s] | 0...0.2998 |
| Measuring range of vibration [m/s²] | 0...156.91 |
| Resolution [m/s²] | 0.01 |
| Set point SP [m/s²] | 2...156.91 |
| Reset point rP [m/s²] | 0...154.91 |
| Measuring range of vibration | 1...50 |
| Resolution | 0.1 |
| Set point SP | 2...50 |
| Reset point rP | 1...49 |
| Measuring range [°C] | -30...80 |
| Resolution [°C] | 0.1 |
| Set point SP [°C] | -28...80 |
| Reset point rP [°C] | -30...78 |
| Accuracy [K] | ± 5 |
| Linearity deviation | 2; (% of the final value) |
| Accuracy | 2-5000Hz +/- 10%, 5000...5600Hz -3dB |
| Parameter setting options | IO-Link |
| Diagnostic functions | self-test |
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | BLOB: Binary Large Object transfer; Common - I&D: Identification and Diagnosis; Function: Locator; Function: ProductURI |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 3.3 |
| IO-Link process data (cyclical) | Function: bit length; v-RMS (x-y-z): 16; velocity scaling: 8; velocity measurement axis: 4; a-Peak (x-y-z): 16; a-RMS (x-y-z): 16; scaling acceleration: 8; measurement axis acceleration: 4; Crest (x-y-z): 16; temperature: 16; scaling Crest + temperature: 8; device status: 4; unbalance event: 1; virtual switching output (v-ou1): 1; binary switching information: 2 |
| IO-Link functions (acyclical) | filter for vibration velocity (v); filter for vibration acceleration (a); Hysteresis; window; Switch points; switching logic; unbalance measurement; machine operating hours counter |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1703 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Рабочая температура | -30...80 |
| Storage temperature [°C] | -30...80 |
| Protection | IP 67; IP 68; IP 69 |
| EMC | EN IEC 61000-6-2: noise immunity / industrial environments; EN IEC 61000-6-4: noise emission |
| Shock resistance | DIN EN 60068-2-27: 50 g 11 ms; 500 g 1 ms |
| Vibration resistance | DIN EN 60068-2-6: 20 g / 10...3000 Hz |
| MTTF [years] | 480 |
| UL approval | UL approval number: L006; File number UL: E251902 |
| Standard | mechanical vibration; ISO 10816-3; ISO 2954; ISO 20816-3 |
| Масса | 98.2 |
| Type of mounting | mounting screw |
| Материал | housing: stainless steel (1.4404 / 316L) |
| Tightening torque [Nm] | 4.6 |
| Display | Power: 1 LED, green; fault: 1 LED, red |
| Items supplied | mounting screw: 1 x (M5 x 25 mm) |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4; Maximum cable length: 20 m |