K.A. Schmersal GmbH & Co. KG AZ316-T12
AZ316-T12
Технические характеристики
| Article number (order number) | 103053367 |
|---|---|
| EAN (European Article Number) | 4030661634494 |
| eCl@ss number, version 12.0 | 27-27-06-10 |
| eCl@ss number, version 11.0 | 27-27-06-10 |
| eCl@ss number, version 9.0 | 27-27-06-10 |
| ETIM number, version 7.0 | EC002592 |
| ETIM number, version 6.0 | EC002592 |
| Сертификация | CCC cULus |
| Standards | EN IEC 60947-5-1 EN ISO 13849-1 EN ISO 14119 |
| Coding level according to EN ISO 14119 | Low |
| Working principle | mechanical |
| Actuating direction | Front and top site |
| Материал | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Масса | 184 g |
| Number of safety contacts | 2 |
| Number of cable glands | 1 |
| Safety classification - Standards | EN ISO 13849-1 |
| Performance Level, up to | c |
| Category | 1 |
| B 10D Normally-closed contact (NC) | 2,000,000 Operations |
| B 10D Normally-open contact (NO) | 1,000,000 Operations |
| Note | at 10% I e and ohmic load |
| Mission time | 20 Year(s) |
| Please note: | Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Safety classification - Fault exclusion - Performance Level, up to | d |
| Safety classification - Fault exclusion - Category | 3 |
| Safety classification - Fault exclusion - Note | for 2-channel use and with suitable logic unit. |
| Mechanical lifetime, minimum | 1,000,000 Operations |
| Latching force | 12 N |
| Positive break travel | 5 mm |
| Positive break force per NC contact, minimum | 10 N |
| Positive break force, minimum | 20 N |
| Actuating speed, maximum | 0.2 m/s |
| Mounting | Screws |
| Type of the fixing screws | 2x M4 |
| Tightening torque of the fixing screws | 1.2 Nm |
| Type of electrical connection | Screw terminals M20 x 1.5 |
| Cable entry | 1 x M20 x 1,5 |
| Termination | Screw terminals |
| Cable section, minimum | 0.34 mm² |
| Cable section, maximum | 1.5 mm² |
| Mechanical data - Connection technique - Note | All indications including the conductor ferrules. |
| Tightening torque of electrical connection, minimum | 0.6 Nm |
| Tightening torque of electrical connection, maximum | 0.8 Nm |
| Allowed type of cable | flexible solid multi-wire solid single-wire |
| Strip length | 5 mm |
| Length of sensor | 37 mm |
| Width of sensor | 40 mm |
| Height of sensor | 113.8 mm |
| IP Degree of protection | IP66 IP67 |
| Рабочая температура | -30 ... +80 °C |
| Storage and transport temperature | -40 ... +85 °C |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Напряжение питания | 300 VAC |
| Напряжение питания | 4 kV |
| Напряжение питания | I |
| Degree of pollution | 3 |
| Thermal test current | 5 A |
| Required rated short-circuit current | 400 A |
| Switching element | 1 NO contact, 2 NC contacts |
| Note (Switching element) | Change-over contact with double break, type Zb or 3 NC contacts, with galvanically separated contact bridges |
| Switching principle | slow action, positive break NC contact |
| Maximum switching frequency | 1,200 /h |
| Материал | Silver |
| Напряжение питания | 230 VAC |
| Current, Utilisation category AC-15 | 3 A |
| Напряжение питания | 24 VDC |
| Current, Utilisation category DC-13 | 3 A |
| Напряжение питания | 230 VAC |
| Electrical data - Auxiliary contacts - Current, Utilisation category AC-15 | 3 A |
| Напряжение питания | 24 VDC |
| Electrical data - Auxiliary contacts - Current, Utilisation category DC-13 | 3 A |
| Note (applications) | hinged safety guard removable guard sliding safety guard |
| Scope of delivery | Actuator must be ordered separately. Slot cover for dust-proof covering of the opening not in use |