K.A. Schmersal GmbH & Co. KG BNS-120-02Z
BNS 120-02Z
Технические характеристики
| Article number (order number) | 101144422 |
|---|---|
| EAN (European Article Number) | 4030661133461 |
| eCl@ss number, version 12.0 | 27-27-44-01 |
| eCl@ss number, version 11.0 | 27-27-24-02 |
| eCl@ss number, version 9.0 | 27-27-24-02 |
| ETIM number, version 7.0 | EC002544 |
| ETIM number, version 6.0 | EC002544 |
| Сертификация | cULus |
| Standards | BG-GS-ET-14 EN IEC 60947-5-3 |
| Coding level according to EN ISO 14119 | None |
| Working principle | Magnetic drive |
| Installation conditions (mechanical) | quasi-flush |
| Материал | Glass-fibre, reinforced thermoplastic |
| Масса | 45 g |
| Coding | Yes |
| Number of normally closed (NC) | 2 |
| Number of safety contacts | 2 |
| Safety classification - Standards | EN ISO 13849-1 |
| Mission time | 20 Year(s) |
| B 10D Normally-closed contact (NC) | 25,000,000 Operations |
| B 10D - Value Normally-closed contact/Normally open contact (NC/NO) | 25,000,000 Operations |
| Actuating element | Magnet |
| Switching distance actuator | Actuating magnet BP 6, Sao: 10 mm Actuating magnet BP 6, Sar: 22 mm Actuating magnet BP 8, Sao: 10 mm Actuating magnet BP 8, Sar: 22 mm Actuating magnet BP 10, Sao: 20 mm Actuating magnet BP 10, Sar: 32 mm Actuating magnet BP 15 SS, Sao: 20 mm Actuating magnet BP 15 SS, Sar: 32 mm |
| Direction of motion | Head-on to the active surface |
| Assured switching distance "ON" S ao | 10 mm 20 mm |
| Assured switching distance "OFF" S ar | 22 mm 32 mm |
| Note (switching distance) | All switching distances in accordance EN IEC 60947-5-3 |
| Length of cable | 1 m |
| Termination | cable |
| Number of cable wires | 4 |
| Wire cross-section | 0.25 mm² |
| Cable diameter | 5 mm |
| Mechanical data - Connection technique - Wire cross-section | 23 AWG |
| Материал | PVC |
| ISO thread of the sensor | M12 |
| Length of sensor | 38.5 mm |
| IP Degree of protection | IP67 |
| Рабочая температура | -25 ... +70 °C |
| Storage and transport temperature | -25 ... +70 °C |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Напряжение питания | 100 VAC |
| Напряжение питания | 100 VDC |
| Switching current, maximum | 0.25 A |
| Switching capacity, maximum | 3 W |
| Switching element | 2 NC contact |
| Switching frequency, maximum | 5 Hz |
| Scope of delivery | Actuator must be ordered separately. |
| Recommendation (actuator) | BP 6 BP 8 BP 10 BP 15 SS |
| Recommended safety switchgear | SRB-E-201LC SRB-E-301ST |
| Note (General) | Contact symbols shown for the closed condition of the guard device. The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN ISO 14119) |