K.A. Schmersal GmbH & Co. KG CSS-11-300-SD-M-ST
CSS 11-300-SD-M-ST
Технические характеристики
| Note (Delivery capacity) | Not available! |
|---|---|
| Article number (order number) | 101213905 |
| EAN (European Article Number) | 4030661405667 |
| eCl@ss number, version 12.0 | 27-27-46-01 |
| eCl@ss number, version 11.0 | 27-27-24-03 |
| eCl@ss number, version 9.0 | 27-27-24-03 |
| ETIM number, version 7.0 | EC001829 |
| ETIM number, version 6.0 | EC001829 |
| Сертификация | cULus |
| Standards | EN IEC 60947-5-3 EN ISO 13849-1 |
| Working principle | inductive |
| Housing construction form | Cylinder, thread |
| Installation conditions (mechanical) | not flush |
| Sensor topology | Sensor for series wiring |
| Материал | Plastic |
| Active area | Plastic |
| Reaction time, maximum | 60 ms |
| Duration of risk, maximum | 60 ms |
| Масса | 135 g |
| Serial diagnostics | Yes |
| Diagnostic output | Yes |
| Short circuit detection | Yes |
| Cross-circuit detection | Yes |
| Safety functions | Yes |
| Cascadable | Yes |
| Integral system diagnostics, status | Yes |
| Number of LEDs | 2 |
| Number of semi-conductor outputs with signaling function | 1 |
| Number of fail-safe digital outputs | 2 |
| Number of series-wiring of sensors | 31 |
| Safety classification - Standards | EN IEC 60947-5-3 EN IEC 61508 |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 3.60 x 10⁻⁹ /h |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
| Actuating panels | from head |
| Mechanical data - Active area | front side |
| Switch distance, typical | 11 mm |
| Assured switching distance "ON" S ao | 8 mm |
| Assured switching distance "OFF" S ar | 15 mm |
| Note (switching distance) | All switching distances in accordance EN IEC 60947-5-3 |
| Hysteresis (Switching distance), maximum | 2 mm |
| Repeat accuracy R | 1 mm |
| Note (length of the sensor chain) | Cable length and cross-section change the voltage drop dependiing on the output current |
| ISO thread of the sensor | M30 |
| Length of sensor | 99.5 mm |
| IP Degree of protection | IP65 IP67 |
| Рабочая температура | -25 ... +65 °C |
| Storage and transport temperature | -25 ... +85 °C |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Restistance to shock | 30 g / 11 ms |
| Protection class | II |
| Напряжение питания | 32 VAC/DC |
| Напряжение питания | 0.8 kV |
| Напряжение питания | III |
| Degree of pollution | 3 |
| Напряжение питания | 24 VDC -15 % / +10 % |
| No-load supply current I 0 , typical | 100 mA |
| Напряжение питания | 24 VDC |
| Operating current | 600 mA |
| Required rated short-circuit current | 100 A |
| Switching frequency, approx. | 3 Hz |
| Rated operating current (safety outputs) | 250 mA |
| Output current, (fail-safe output), maximum | 0.25 A |
| Design of control elements | p-type |
| Напряжение питания | 0.5 V |
| Leakage current I r , maximum | 0.5 mA |
| Напряжение питания | 24 VDC |
| Current, Utilisation category DC-12 | 0.25 A |
| Напряжение питания | 24 VDC |
| Current, Utilisation category DC-13 | 0.25 A |
| Electrical data - Diagnostic outputs - Operating current | 150 mA |
| Electrical data - Diagnostic outputs - Design of control elements | p-type |
| Напряжение питания | 5 V |
| Interfering radiation | IEC 61000-6-4 |
| EMC rating | IEC 61000-6-2 |
| PIN 1 | 1A1 Ue: (1) |
| PIN 2 | X1 Safety input 1 |
| PIN 3 | A2 GND |
| PIN 4 | Y1 Safety output 1 |
| PIN 5 | SD serial diagnostic output |
| PIN 6 | X2 Safety input 2 |
| PIN 7 | Y2 Safety output 2 |
| PIN 8 | IN serial diagnostic input |
| Scope of delivery | Actuator must be ordered separately. |
| Материал | 2x Mounting accessories Nuts M30 |
| Recommendation (actuator) | CST 30S-1 |
| Recommended safety switchgear | PROTECT PSC1 SRB-E-201LC SRB-E-301ST |
| Note (General) | Evaluation requirements: The switch-off pauses of 250 µs – 1500 µs must be tolerated by the evaluation. The switch-off time of the safety sensor of 250 μs is additionally extended according the cable length and the capacity of the cable used. Typical |