MVH-015-11Y

K.A. Schmersal GmbH & Co. KG MVH-015-11Y

MVH 015-11Y

Технические характеристики

Article number (order number)101058433
eCl@ss number, version 12.027-27-06-01
eCl@ss number, version 11.027-27-06-01
eCl@ss number, version 9.027-27-06-01
ETIM number, version 7.0EC000030
ETIM number, version 6.0EC000030
StandardsEN IEC 60947-5-1
Working principlemechanical
МатериалLight-alloy diecast
Материалchromated
Масса345 g
Number of normally closed (NC)1
Number of normally open (NO)1
Actuating elementRoller lever
МатериалPlastic
Mechanical lifetime, minimum1,000,000 Operations
Actuating angle, from left of switch axis30 °
Actuating angle, from right of switch axis30 °
Contact openingmax. 2 x 2.5 mm
Actuating speed, minimum1 mm/min
Actuating speed, maximum3 m/s
Note (Actuating speed)Actuating speed with vertical actuating angle to switch axis
Actuating torque0.3 Nm
Cable entry3 x M20 x 1,5
Cable section, minimum1.5 mm²
Cable section, maximum2.5 mm²
NoteAll indications including the conductor ferrules.
Wire cross-section, maximum13 AWG
Terminal (mechanical)Screw connection
Length of sensor43 mm
Width of sensor67 mm
Height of sensor133 mm
Width of Castor8.5 mm
Diameter of Castor20 mm
Diameter of the ISO-threadM3
IP Degree of protectionIP65
Рабочая температура-30 ... +90 °C
Protection classI
Напряжение питания400 V
Напряжение питания6 kV
Degree of pollution3
Thermal test current10 A
Напряжение питания400 VAC
Operating current2,500 mA
Required rated short-circuit current1,000 A
Utilisation category AC-15400 VAC
Electrical data - Utilisation category AC-152.5 A
Switching element1 NO contact, 1 NC contacts
Switching principleSnap action
Bounce duration, maximum2.5 ms
Maximum switching frequency500 /h
Switchover time, maximum40 ms
МатериалSilver
Получить предложение по этой позиции