K.A. Schmersal GmbH & Co. KG NWSE10K.1
NWSE10K.1
Категории:
Технические характеристики
| Article number (order number) | 103042356 |
|---|---|
| EAN (European Article Number) | 4030661560144 |
| eCl@ss number, version 12.0 | 27-37-12-13 |
| eCl@ss number, version 11.0 | 27-37-12-13 |
| eCl@ss number, version 9.0 | 27-37-12-13 |
| ETIM number, version 7.0 | EC000222 |
| ETIM number, version 6.0 | EC000222 |
| Сертификация | cULus |
| Standards | EN IEC 60947-5-1 |
| Versions | Front plate mounting Step selector switch |
| Design | Round |
| Installation conditions (mechanical) | arbitrarily |
| Toggle | long |
| Sealing type | Lip gaskets Membrane |
| Материал | ABS, chrome-plated |
| Материал | ABS |
| Colour of the front ring | Silver |
| Colour of the handle | Black |
| Colour of the bellows | Black |
| Масса | 100 g |
| Latching | Yes |
| Fully insulated | Yes |
| Number of switch positions | 10 |
| switching angle | 30 ° |
| Mounting | mounting flange |
| Tightening torque of the screw | 0.6 Nm |
| Cable section, minimum | 0.5 mm², flexible 0.5 mm², rigid |
| Cable section, maximum | 1.5 mm², flexible 2.5 mm², rigid |
| Note | All indications including the conductor ferrules. |
| Terminal (mechanical) | Screw connection M20 x 1,5 |
| Mounting height | 26 mm |
| Note (Mounting height) | Height in front of the front panel. |
| Mounting depth | 87.5 mm |
| Diameter of the front ring | 44.5 mm |
| Length of the handle | 46 mm |
| Diameter of the knob | 39 mm |
| Mounting diameter | 22.3 mm |
| Thickness, of the front panel, minimum | 1 mm |
| Thickness of the front panel, maximum | 6 mm |
| IP Degree of protection | IP67 IP69K |
| Рабочая температура | +0 ... +75 °C |
| Resistance to vibrations | 5 g |
| Restistance to shock | <50 g (EN 60068-2-27) |
| Напряжение питания | 690 V |
| Thermal test current | 20 A |
| Switching capacity, AC-3 | 5,500 W |
| Switching capacity, AC-23 | 7,500 W |
| Note (General) | A protection against corrosion for the electrical elements behind the front plate cannot be guaranteed. If a zero position is required, we recommend to use stage 1 (contact 1) to that effect and not to assign it. |