K.A. Schmersal GmbH & Co. KG UK-431Y
UK 431Y
Технические характеристики
| Article number (order number) | 101055015 |
|---|---|
| EAN (European Article Number) | 4030661002989 |
| eCl@ss number, version 12.0 | 27-27-06-01 |
| eCl@ss number, version 11.0 | 27-27-06-01 |
| eCl@ss number, version 9.0 | 27-27-06-01 |
| ETIM number, version 7.0 | EC000030 |
| ETIM number, version 6.0 | EC000030 |
| Сертификация | cULus |
| Standards | EN IEC 60947-5-1 |
| Working principle | mechanical |
| Slide form | Castor |
| Материал | Light alloy die-casting |
| Материал | painted |
| Масса | 300 g |
| Number of normally closed (NC) | 1 |
| Actuating element | Offset roller lever |
| Материал | Plastic |
| Mechanical lifetime, minimum | 10,000,000 Operations |
| Note (Mechanical lifetime) | Contact life: 2 million operations at 6A / 400V, cos ᵠ = 0.4 |
| Actuating angle, from left of switch axis | 45 ° |
| Actuating angle, from right of switch axis | 30 ° |
| Contact opening | 2 x 1.5 mm |
| Actuating speed, minimum | 60 mm/min |
| Actuating speed, maximum | 0.5 m/s |
| Note (Actuating speed) | Actuating speed with vertical actuating angle to switch axis |
| Termination | Screw terminals M20 x 1.5 |
| Cable section, minimum | 1.5 mm² |
| Cable section, maximum | 2.5 mm² |
| Note | All indications including the conductor ferrules. |
| Wire cross-section | 13 AWG |
| Terminal (mechanical) | Screw connection |
| Length of sensor | 50 mm |
| Width of sensor | 62 mm |
| Height of sensor | 96 mm |
| Width of Castor | 8.5 mm |
| Diameter of Castor | 20 mm |
| Diameter of the ISO-thread | M4 |
| IP Degree of protection | IP65 |
| Рабочая температура | -20 ... +60 °C |
| Напряжение питания | 500 V |
| Напряжение питания | 6 kV |
| Thermal test current | 16 A |
| Напряжение питания | 400 VAC |
| Operating current | 6,000 mA |
| Switching element | 1 NC contact |
| Switching principle | Slow action, double break |
| Maximum switching frequency | 3,000 /h |
| Материал | Silver |
| Note (General) | Actuation from the right should be avoided, since this reduces the mechanical life of the position switch. Type of contact and switching points can be factory set to order. |