ZSD5/O.LTG

K.A. Schmersal GmbH & Co. KG ZSD5/O.LTG

ZSD5/O.LTG.

Технические характеристики

Article number (order number)101199467
EAN (European Article Number)4030661521435
eCl@ss number, version 12.027-37-12-38
eCl@ss number, version 11.027-37-12-38
eCl@ss number, version 9.027-37-12-38
ETIM number, version 7.0EC002571
ETIM number, version 6.0EC002571
СертификацияcULus
StandardsCSA C22.2 Nr.14 EN IEC 60204-1 EN IEC 60947-1 EN IEC 60947-5-1 EN ISO 11161 EN ISO 12100 JIS C8201-5-1 UL 508 1
МатериалPlastic, thermoplastic, self-extinguishing
Масса190 g
Number of normally closed (NC)1
Number of normally open (NO)2
Safety classification - StandardsEN IEC 61508 EN ISO 13849-1
B 10D Normally-closed contact (NC)100,000 Operations
B 10D Normally-open contact (NO)100,000 Operations
Mission time20 Year(s)
Note (Mechanical lifetime)NO: Stage 1 - 2 - 1: 1,000,000 operations Stage 1 - 2 - 3 - 1: 100,000 operations
Cable entry1 x M20 x 1,5
TerminationScrew terminals
Authorised cable section, minimum7 mm
Authorised cable section, maximum13 mm
Cable section, minimum0.14 mm²
Cable section, maximum1.5 mm²
IP Degree of protectionIP65
Рабочая температура-10 ... +60 °C
Storage and transport temperature-40 ... +80 °C
Resistance to vibrationsOperation: 5 … 55 Hz, Amplitude 0,5 mm min./ Damage: 16,7 Hz, Amplitude 1,5 mm min.
Restistance to shockOperation: 100 m/s², Damage: 1.000 m/s²
Напряжение питания2.5 kV
Напряжение питания250 VAC
Operating current3,000 mA
External wire and device fuse rating10A f
Contact resistance, maximum0.1 Ω
Note (Contact resistance)in new state
Switching elementNO contact, NC contact
Switching principleSlow action
Maximum switching frequency1,200 /h
МатериалSilver
Напряжение питания125 VAC
Current, Utilisation category AC-151.5 A
Напряжение питания125 VDC
Current, Utilisation category DC-130.22 A
Напряжение питания125 VAC
Electrical data - Auxiliary contacts - Current, Utilisation category AC-151 A
Напряжение питания125 VDC
Electrical data - Auxiliary contacts - Current, Utilisation category DC-130.22 A
Recommended safety switchgearSRB, 2-channel with cross-wire detection
Note (General)1) If the device is to be used in a damp room, a suitable connection cable must be used. 1) This device has been tested for impact and fire resistance according to UL508. Customer-specific versions, with connecting cable, are available upon request. Only a double shielded cable is authorised as supply line. The monitoring module must offer the possibility of cross-wire monitoring.
Получить предложение по этой позиции