KE
KEYENCE CORPORATION AP-31KP
AP-30 series (Two-color Digital Display Pressure Sensor) - AP-31KP
Категории:
Технические характеристики
| Type | Negative pressure, PNP |
|---|---|
| Rated pressure | 0 to -29.9 inchHg |
| Fluid type | Air or non-corrosive gases |
| Type of pressure | Gauge pressure |
| Display | 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm 0.43" ) |
| Display resolution | 0.1 inchHg, 0.1 kPa, 1 mmHg, 0.001 bar |
| Detectable pressure range | -15 to +110 % of F.S. |
| Display temperature characteristic | ±1 % max. (of F.S.) of detecting pressure at 25 °C 77 °F (0 to 50 °C 32 to 122 °F ) |
| Время отклика | 2.5/5/100/500 ms (selectable) |
| I/O (Analog output) | 1 to 5 V (Load impedance: 47 kΩ min.) |
| I/O (Control output) | PNP open-collector 100 mA max. (30 V max.), Residual voltage: 1 V max. 2-output (N.O./N.C.selectable) |
| Напряжение питания | 12 to 24 VDC ±10 % |
| Rating (Current consumption) | 50 mA (at 24 V) or less, 90 mA (at 12 V) or less |
| Environmental resistance (Pressure resistance) | 72.5 PSI |
| Рабочая температура | 0 to +50 °C 32 to 122 °F (No freezing) |
| Environmental resistance (Relative humidity) | 35 to 85 % RH (No condensation) |
| Environmental resistance (Vibration resistance) | 10 to 55 Hz, Double amplitude 1.5 mm 0.06" , 2 hours in each of the X, Y, and Z directions |
| Материал | Front housing: Polyamide, Front panel sheet: PET, Rear housing: Polysulfone, Pressure port: Die-cast zinc, Cable: Oil-proof cabtyre cable |
| Масса | Approx. 120 g |