KE
KEYENCE CORPORATION BL-180
BL-180 series (CCD считыватель штрихкода) - BL-180
Категории:
Технические характеристики
| Reading direction | Front |
|---|---|
| Light source/Light receiving element | LED/CCD image sensor |
| Reading distance | 33 ±10 mm 1.30"±0.39" (Using narrow bars of at least 0.19 mm 0.007" in width) |
| Readable bar width | 0.125 to 1.0 mm 0.005" to 0.039" |
| Largest readable label width | 80 mm 3.15" (Using narrow bars of at least 0.19 mm 0.007" in width) |
| PCS | 0.45 or more (Refl ectance of white part: 75% or more) |
| Scanning rate | 500 scans/sec |
| Supported codes | CODE39, ITF, Industrial 2-of-5, COOP 2-of-5, Codabar, CODE128, EAN/UPC (A·E) |
| Number of readable digits | 32 digits |
| Trigger input | Non-voltage input (contact or solid-state), TTL input is also possible. |
| Serial interface (Applied standard) | RS-232C |
| Serial interface (Synchronization) | Start-Stop |
| Serial interface (Transmission code) | ASCII |
| Serial interface (Baud rate) | 600/1200/2400/4800/9600/19200/31250/38400 bps |
| Serial interface (Data length) | 7/8 bits |
| Serial interface (Parity check) | None/Even/Odd |
| Serial interface (Stop bit length) | 1 bit/2 bits |
| OK/NG output (Output form) | NPN |
| OK/NG output (Rated load) | 24 VDC, 100 mA |
| OK/NG output (Leakage current (at OFF)) | 0.1 mA max. |
| Напряжение питания | 0.5 V max. |
| Напряжение питания | 5 VDC ±5 % |
| Rating (Current consumption) | 300 mA |
| Environmental resistance (Ambient light) | Sunlight/Incandescent lamp: 10,000 lux, Fluorescent lamp: 3,000 lux. |
| Рабочая температура | 0 to +40 °C 32 to 104 °F |
| Environmental resistance (Relative humidity) | 35 to 85 % RH (No condensation) |
| Environmental resistance (Operating environment) | No dust or corrosive gases present |
| Environmental resistance (Vibration resistance) | 10 to 55 Hz, Double amplitude 1.5 mm 0.06" , 2 hours in each of the X, Y, and Z directions |
| Масса | Approx. 165 g |