KE
KEYENCE CORPORATION CU-21TA
CU series (Control Unit) - CU-21TA
Категории:
Технические характеристики
| Type | Multi-functional |
|---|---|
| External calibration input signal (Connection sensor) | NPN open-collector output type or type with output with contacts (signal input and synchronization input) |
| Input (No. of inputs) | 2 |
| Input (Minimum input time) | 0.5 ms |
| Input (Input system) | Transistor (via NPN output device), contact (via limit switch/microswitch, etc.) |
| Control output | Relay output: 1c, 250 VAC, 2 A (resistive load) maximum NPN open-collector output: 100 mA (40 V or less) |
| Timer | ON-delay, OFF-delay, One-shot, timer OFF (selectable), 0 .05 to 1 s/0.5 to 10 s (selectable) |
| Functions | Input signal inversion, edge sync. / level sync. selectable, AND logic |
| Operation mode | Timer, standard, synchronous |
| Control output (Relay contact) | 250 VAC 2A SPDT (1c) (resistive load) |
| Control output (Transistor) | NPN: 100 mA (40 VDC) max. |
| DC output | 12 VDC ±10%, 200 mA max. |
| Напряжение питания | 100 to 240 VAC ±10 %, 50/60 Hz |
| Rating (Power consumption) | 7 VA max. |
| Рабочая температура | -10 to +50 °C 14 to 122 °F (No freezing) |
| Environmental resistance (Relative humidity) | 35 to 85 % RH (No condensation) |
| Accessories | Plastic screwdriver |
| Масса | Approx. 120 g |