KE
KEYENCE CORPORATION GL-R04L
GL-R series (световой барьер безопасности) - GL-R04L
Категории:
Технические характеристики
| Detection capability | ø1.77" ø45 mm |
|---|---|
| Общая длина | 6.30" 160mm |
| No. of beam | 4 |
| Detection height | 4.72" 120mm |
| Protection height | 8.07" 205mm |
| Beam axis spacing/Lens diameter | 40 mm / ø5 1.57" / ø0.20" |
| Detecting distance | 0.66 to 49.21' 0.2 to 15 m |
| Effective aperture angle | Max. ±2.5° (When operating distance is 9.84' 3 m or more) |
| Light source | Infrared LED (870 nm) |
| Время отклика | 6.6; 48.7; 63.1 |
| Время отклика | 6.9; 49.1; 64.2 |
| Detection mode | Turns on when no interruptions are present in the detection zone |
| Synchronization between the transmitter and receiver | Optical synchronization or Wire synchronization (Determined by wiring) |
| Light interference prevention function | Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically |
| Control output (OSSD output) (Output) | 2 transistor outputs. (PNP or NPN is determined by the cable type) |
| Control output (OSSD output) (Max. load current) | 500 mA |
| Напряжение питания | Max. 2.5 V (with a cable length of 16.40' 5 m) |
| Напряжение питания | Max. 2.0 V (with a cable length of 16.40' 5 m) |
| Control output (OSSD output) (Leakage current) | Max. 200 µA |
| Control output (OSSD output) (Max. capacitive load) | 2.2 µF |
| Control output (OSSD output) (Load wiring resistance) | Max. 2.5 Ω |
| Supplemental output (Non-safety-related output) (AUX) | transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m) |
| Supplemental output (Non-safety-related output) (Muting lamp output) | Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected. |
| External input (When using a PNP output cable) | ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only) |
| External input (When using an NPN output cable) | ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only) |
| Напряжение питания | 24 VDC ±20%, ripple (P-P) 10% or less, Class 2 |
| Power supply (Current consumption (Max.) (mA)) | 37; 66 |
| Protection circuit | Reverse current protection, short-circuit protection for each output, surge protection for each output |
| Approved standards (EMC) | IEC61496-1, EN61496-1, UL61496-1; EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA |
| Approved standards (Safety) | IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998 |
| Степень защиты (IP) | IP65/IP67 (IEC60529) |
| Напряжение питания | II |
| Environmental resistance (Ambient light) | Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less |
| Рабочая температура | -10 to +55 °C 14 to 131 °F (No freezing) |
| Environmental resistance (Operating relative humidity) | 15 to 85 % RH (No condensation) |
| Environmental resistance (Storage temperature) | -25 to +60 °C -13 to 140 °F (No freezing) |
| Environmental resistance (Storage relative humidity) | 15 to 95 % RH |
| Environmental resistance (Vibration resistance) | 10 to 55 Hz, Double amplitude 0.7 mm 0.03" , 20 sweeps in each of the X, Y, and Z directions |
| Environmental resistance (Shock resistance) | 100 m/s 2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions |
| Материал | Aluminum |
| Материал | Nylon (GF 30%) |
| Материал | Polycarbonate, SUS304 |
| Масса | 210 g |