KE
KEYENCE CORPORATION GL-S24FH
GL-S series (световой барьер безопасности) - GL-S24FH
Категории:
Технические характеристики
| Type | Flat type |
|---|---|
| Detection capability | ø25 mm ø0.98" |
| Общая длина | 499.5 mm 19.67" |
| No. of beam | 24 |
| Detection height | 460mm 18.11" |
| Protection height | 506mm 19.92" |
| Beam axis spacing | 20 mm 0.79" |
| Operating distance | 0.1 to 2 m 0.3' to 6.6' |
| Effective aperture angle | Max. ±3.75° (when the operating distance is 2 m 6.6' ) |
| Light source | Infrared LED (870 nm) |
| Время отклика | 7.0; 49.3; 64.9 |
| Время отклика | 9.5; 53.0; 74.7 |
| OSSD operation | Turns on when no interruptions are present in the detection zone |
| Synchronization between the transmitter and receiver | Optical synchronization or wire synchronization (determined by the wiring) |
| Light interference prevention function | Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically |
| Control output (OSSD output) (Output type) | 2 transistor outputs (PNP or NPN output is determined by the cable type.) |
| Control output (OSSD output) (Max. load current) | Max. 300 mA |
| Напряжение питания | Max. 2.5 V (with a cable length of 5 m 16.4' ) |
| Напряжение питания | Max. 2.0 V (with a cable length of 5 m 16.4' ) |
| Control output (OSSD output) (Leakage current) | Max. 200 µA |
| Control output (OSSD output) (Max. load capacitance) | 2.2 µF |
| Control output (OSSD output) (Load wiring resistance) | Max. 2.5 Ω |
| Inputs 1 and 2 | Short-circuit current: approx. 1 mA |
| Power supply (Current consumption(mA)) | 41; 64; 28; 51 |
| Напряжение питания | 24 VDC ±20%, ripple (P-P) 10% or less, Class 2 |
| Protection circuit | Reverse current protection, short-circuit protection and surge protection for each output |
| Approved standards (EMC) | IEC61496-1, EN61496-1, UL61496-1; EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA |
| Approved standards (Safety) | IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1: 2015 (Category 4, PLe) UL508, UL1998 GB/T4584 |
| Степень защиты (IP) | IP65/IP67 (IEC60529) |
| Напряжение питания | II |
| Environmental resistance (Ambient light) | Incandescent lamp: 3,000 lux or less, Sunlight: 20,000 lux or less |
| Рабочая температура | -10 to +50 °C 14 to 122 °F (No freezing) |
| Environmental resistance (Operating relative humidity) | 15 to 85 % RH (no condensation) |
| Environmental resistance (Storage temperature) | -25 to +60 °C -13 to 140 °F (No freezing) |
| Environmental resistance (Storage relative humidity) | 15 to 95 % RH |
| Environmental resistance (Vibration resistance) | 10 to 55 Hz, Double amplitude 0.7 mm 0.03" , 20 sweeps in each of the X, Y, and Z directions |
| Environmental resistance (Shock resistance) | 100 m/s 2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions |
| Материал | Polyarylate |
| Масса | 220 g |
| Масса | 225 g |