KE
KEYENCE CORPORATION KV-N14AT
KV Nano series (Programmable Logic Controller) - KV-N14AT
Категории:
Технические характеристики
| Напряжение питания | 100 to 240 VAC (+10%/-15%) |
|---|---|
| Рабочая температура | 0 to 55°C 32 to 131°F (no freezing) |
| General specifications (Operating ambient humidity) | 5 to 95%RH (no condensation) |
| General specifications (Operating environment) | As little dust and corrosive gas as possible |
| General specifications (Noise immunity) | 1500 V peak-to-peak or more, pulse duration 1 μs, 50 ns (based on noise simulator), IEC standard compliant (IEC61000-4-2/3/4/6) |
| Напряжение питания | 1500 VAC for 1 minute, between power supply terminal and I/O terminals and between all external terminals and case |
| General specifications (Insulation resistance) | 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, and between all external terminals and case) |
| Напряжение питания | 24 VDC (±10%; output capacity : 0.6 A) |
| General specifications (Storage temperature) | −25 to +75°C −13 to +167°F |
| General specifications (Vibration resistance) | Amplitude: 3.5 mm 0.14"; Acceleration: 9.8 m/s 2 32.2'/s 2; Amplitude: 1.75 mm 0.07"; Acceleration: 4.9 m/s 2 16.1'/s 2 |
| General specifications (Shock resistance) | Acceleration: 150 m/s 2 492.1'/s 2 , application time: 11 ms, three times in each of the X, Y, and Z directions |
| General specifications (Operating altitude) | 2000 m 6561.7' or less |
| Напряжение питания | AC: II, DC: I |
| General specifications (Pollution degree) | 2 |
| Performance specifications (Calculation control method) | Program storage method |
| Performance specifications (I/O control method) | Refresh method |
| Performance specifications (Program language) | Expanded ladder, KV Script, mnemonic |
| Performance specifications (Number of instructions) | Basic instruction: 81 types and 182 instructions, Application instruction: 39 types and 56 instructions, Calculation instruction: 123 types and 311 instructions, Expansion instruction: 92 types and 141 instructions, Total: 335 types and 690 instructions |
| Performance specifications (Instruction execution speed) | Basic instruction: 50 ns minimum, Application instruction: 170 ns minimum |
| Performance specifications (Program capacity) | 8k steps |
| Performance specifications (Maximum number of attachable I/O units) | 3 |
| Performance specifications (Maximum number of I/O points) | 128 (excluding the base unit I/O) |
| Performance specifications (Input relay/Output relay/Internal auxiliary relay) | Total of 9600 points 1 bit (R000 to R59915) |
| Performance specifications (Link relay) | 8192 points 1 bit (B0 to B1FFF) |
| Performance specifications (Internal auxiliary relay) | 9600 points 1 bit (MR000 to MR59915) |
| Performance specifications (Latch relay) | 3200 points 1 bit (LR000 to LR19915) |
| Performance specifications (Control relay) | 1440 points 1 bit (CR000 to CR8915) |
| Performance specifications (Timer) | 512 points 32 bit (T0 to T511) |
| Performance specifications (Counter) | 256 points 32 bit (C0 to C255) |
| Performance specifications (Data memory) | 32768 points 16 bit (DM0 to DM32767) |
| Performance specifications (Link register) | 16384 points 16 bit (W0 to W3FFF) |
| Performance specifications (Temporary memory) | 512 points 16 bit (TM0 to TM511) |
| Performance specifications (High-speed counter) | 2 points (CTH0 to CTH1), 32-bit automatic reset counter (Input response: 100 kHz per single phase, 50 kHz per phase difference) |
| Performance specifications (High-speed counter comparator) | 4 points (CTC0 to CTC3), 32 bits, two points per high-speed counter |
| Performance specifications (Index register) | 12 points 32 bit (Z01 to Z12) |
| Performance specifications (Control memory) | 9000 points 16 bit (CM0 to CM8999) |
| Performance specifications (Positioning pulse output) | 2 axes, Maximum output frequency: 100 kHz |
| Performance specifications (Base unit I/O) | Input: 8 points, output: 6 points, Input common: 1 point, Output common: 1 point |
| Performance specifications (Number of comments and labels that can be stored in the main unit) | 10000 When a maximum-length ladder program is written with no labels.; 14000 When a maximum-length ladder program is written with no device comments. |
| Performance specifications (Power off hold function) | Flash ROM can be rewritten 10000 times; Nonvolatile RAM |
| Performance specifications (Self-diagnosis function) | CPU error, RAM error, and other problems |
| Input specifications (Relay number) | General input: R000 to R003 (4 points), High-speed A-phase and B-phase input: R004 to R007 (2 channels, 4 points in total) |
| Input specifications (Input mode) | 24 VDC input (open collector) |
| Напряжение питания | 26.4 VDC |
| Напряжение питания | 24 VDC (General input: 5.3 mA, High-speed A-phase and B-phase input: 6.5 mA ) |
| Напряжение питания | 19 VDC |
| Input specifications (Maximum OFF current) | 1.5 mA |
| Input specifications (Common method) | General input: All points/1 common (1 terminal), High-speed A-phase and B-phase input: Shared common for all points (shared with general input) |
| Input specifications (Circuit delay time) | General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), ON to OFF: Max. 50 μs (Typ. 15 μs) High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs) |
| Input specifications (Input time constant) | Normal: 10 ms, When the HSP instruction is used: 10 μs When CR2305 is turned ON: 10 μs to 10 ms, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.; Input time constant setting 10 μs: Digital filter 1.6 to 2 μs Input time constant setting 20 μs: Digital filter 9 to 12 μs Input time constant setting 110 μs: Digital filter 90 to 93 μs Input time constant setting 500 μs: Digital filter 300 to 400 μs Input time constant setting 1 ms: Digital filter 800 to 900 μs Input time constant setting 2.5 ms: Digital filter 2.3 to 2.4 ms Input time constant setting 5 ms: Digital filter 4.0 to 4.5 ms Input time constant setting 10 ms: Digital filter 9 to 9.5 ms |
| Input specifications (Response frequency) | (High-speed A-phase and B-phase input) Single phase: 100 kHz, phase difference: 50 kHz, 24 V ±10%, Duty 50% |
| Output specifications (Relay number) | General output: R504 to R505 (2 points), High-speed output: R500 to R503 (4 points) |
| Output specifications (Output mode) | MOSFET |
| Output specifications (Rated load) | 30 VDC, 0.5 A |
| Напряжение питания | 30 VDC |
| Output specifications (Leakage current at OFF) | 100 μA or less |
| Напряжение питания | 0.8 VDC or less (with 0.5 A output), 0.6 VDC or less (with 0.3 A output) |
| Output specifications (Common method) | 8 to 10 points/1 common |
| Время отклика | General output: OFF to ON: 100 μs (load of 1 mA or more), ON to OFF: 200 μs (load of 1 mA or more) High-speed output: OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load) |
| Output specifications (Overcurrent protection) | Protection provided for each common |
| Output specifications (Output frequency) | High-speed output: 100 kHz (7 to 100 mA load) |
| Built-in serial port (Interface) | RS-232C; Modular connector |
| Built-in serial port (Transmission specifications RS-232C) | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps; Full duplex; 1 bit; 7 bits, 8 bits; 1 bit, 2 bits; Even, odd, none; 15 m 49.2'; 1 |
| Built-in serial port (Indication) | SD (green), RD (red) |
| Internal current consumption | 75 VA (* The VA values are calculated with a power factor of 30%.) |
| Масса | Approx. 420 g |