KE
KEYENCE CORPORATION KV-XH16ML
KV-8000 series (Programmable Logic Controller) - KV-XH16ML
Категории:
Технические характеристики
| No. of control axes | 16 axes (total including virtual axes) |
|---|---|
| Output format | MECHATROLINK-III |
| Max. number of connectable units | 7 |
| Control mode | Positioning control, Torque control, Speed control, ML-III command, I/O control |
| Control period | 62.5 μs or more (With SV2 Series: 125 μs or more) |
| Axis control function execution method | Ladder program, unit program (flow, C language) |
| Position unit | mm, inch, deg (angle), PLS (number of pulses) Decimal point position from 0 to 9 digits, unit conversion function available |
| Positioning control (Number of points) | 100 points/axis (Trajectory control at 100 points or more possible with flows) |
| Synchronization control (Cam) | Resolution: 2048 to 32768 Data points: 4 to 64 (changes according to the resolution) |
| Origin return (Origin return method) | Data set type, dog type (push), dog type (selectable from “with Z phase” or “without Z phase”), dog type sizing (selectable from “with Z phase” or “without Z phase”), immediate Z phase, origin sensor and Z phase, rising edge of limit switch, origin sensor midpoint/rising edge |
| Memory data | Point parameters (each axis), synchronization parameters (each axis), cam data, unit program, servo parameters, setting read/write during RUN (with some restrictions) |
| Output display | LINK, CONNECT, error status |
| Parameter setting | Parameters can be set from KV STUDIO, ladder programs, and unit programs (flow) |
| Data backup | Coordinates: nonvolatile memory backup (unlimited) Parameter settings: flash ROM backup (20000 switches) |
| Internal current consumption | 400 mA or less |
| Масса | Approx. 280 g |