KE
KEYENCE CORPORATION LJ-S8002
LJ-S8000 series (3D Laser Snapshot Sensor) - LJ-S8002
Категории:
Технические характеристики
| Head input | Up to two LJ-S8000 Series head units * When using two units, heads A and B must be the same model. |
|---|---|
| Number of registered inspection settings | Up to 1000 settings (depending on SD card capacity and setting contents) for each of SD card 1 and SD card 2; External switching possible |
| Master profile / number of reference images | Up to 400 per setting (depending on SD card capacity) |
| Memory card | • SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB; Equipped as standard for SD1 slot), and CA-SD16G (16 GB) |
| Number of tools | Up to 100 per setting |
| Interface (Control input) | 20 points (Input terminal block: 5 points, Parallel I/O: 15 points) |
| Interface (Control output) | • 28 points (Output terminal block: 6 points, Parallel I/O: 22 points) • Photo MOSFET |
| Interface (RS-232C) | • Numerical value output and control I/O (When in use, PLC Link using the RS-232C port cannot be used) • Supports baud rates of up to 230400 bps |
| Interface (PLC link) | • Numerical value output and control I/O using Ethernet or RS-232C ports (Cannot be used with EtherNet/IP™; When using an RS-232C port, cannot be used with RS-232C no-procedure communication) |
| Interface (Ethernet) | • Numerical value output and control I/O • In addition to the functions above, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • Supports FTP client, FTP server, VNC server (for non-PC clients, only monitor screen display is supported), and BOOTP functions supported • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames |
| Interface (USB) | • In addition to numerical value output, uploading/downloading inspection settings, performing various simulations, and sending/receiving images and other data, and using remote desktop connections are possible via KEYENCE PC application software. • USB 2.0 only |
| Interface (EtherNet/IP TM) | • Numerical value I/O and control I/O using the Ethernet port or optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, or EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port) / 1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version CT19.1 (Ethernet port) / CT19.1 (CB-NEP20E) conformance tests |
| Interface (PROFINET) | • Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP™, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA) |
| Interface (EtherCAT ®) | • Numerical value output and control I/O using optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC Link, EtherNet/IP™, or PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes / Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit device identification • Complies with Version 2.5.0 conformance test |
| Interface (Mouse) | Various menus can be controlled using the dedicated mouse (included with the controller) |
| Interface (SNTP) | Automatic correction of controller date and time when connected to an SNTP server |
| Interface (USB HDD) | Images and other data can be output by connecting an HDD (2 TB max.) to the dedicated USB port (USB 3.0-compliant, bus-powered, rated output: 900 mA) |
| Interface (Monitor output) | Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz) |
| Cooling fan | Available |
| Language | Switchable between English, Japanese, and Chinese (Simplified) |
| Напряжение питания | 24 VDC ±10% |
| Ratings (Maximum current consumption) | Max. 2.5 A (Typ. 28 W) |
| Рабочая температура | 0 to 45°C 32.0°F to 113.0°F (DIN rail mounting) / 0 to 40°C 32.0°F to 104.0°F (Base surface mounting) |
| Environmental resistance (Relative humidity) | 85% RH or less (no condensation) |
| Масса | Approx. 2200 g 4.85 lb |