KE
KEYENCE CORPORATION LJ-X8000A
LJ-X8000 series (2D/3D Laser Profiler) - LJ-X8000A
Категории:
Технические характеристики
| Head input | Up to 1 head Compatible with LJ-X8000 series heads and LJ-V7000 series heads |
|---|---|
| Sampling cycle (trigger interval) | When connecting the LJ-X8000 Series: maximum speed of 16 kHz (63 μs) When connecting the LJ-V7000 Series: maximum speed of 64 kHz (16 μs) (Luminance output types for model designations ending with B have a maximum speed of 8 kHz (125 μs)) |
| Interface (Control input) | Supports the batch measurement start (MEASURE_START) and batch measurement stop (MEASURE_STOP). |
| Interface (Control output) | •Supports the trigger ready (READY) and system error (ERROR). •Photo MOSFET |
| Interface (Synchronous input / output) | For trigger synchronization of multiple controllers |
| Interface (Ethernet) | Supports the profile output, setting, controll, 1000BASE-T/100BASE-TX |
| Encoder input | One system RS-422 line driver output (with 5 V output: Up to 150 mA), Open collector output (5 V / 24 V compatible) combined use |
| Response frequency (RS-422) | Single phase/Z-phase : 1.6 MHz 2-phase/1-multiplier : 1.6 MHz 2-phase/2-multiplier : 3.2 MHz, 2-phase/4-multiplier : 6.4 MHz |
| Response frequency (Open collector (OC)) | Single phase/Z-phase : 100 kHz 2-phase/1-multiplier : 100 kHz 2-phase/2-multiplier : 200 kHz, 2-phase/4-multiplier : 400 kHz |
| Laser ON input | Non-voltage Input (a short circuit via the short pin at the time of shipment from the factory) |
| Напряжение питания | 24 VDC±10% |
| Ratings (Maximum current consumption) | 1.3A |
| Рабочая температура | 0 to + 45 °C (DIN rail mounting) / 0 to + 40 °C (side mounting) |
| Environmental resistance (Relative humidity) | 85% RH or less (no condensation) |
| Масса | Approx. 700 g |