KE
KEYENCE CORPORATION LJ-X8000E
LJ-X8000 series (2D/3D Laser Profiler) - LJ-X8000E
Категории:
Технические характеристики
| Head input | Up to 2 head units Compatible with LJ-X8000 Series heads and LJ-V7000 Series heads *When using 2 units, heads A and B are the same model. |
|---|---|
| Sampling cycle (trigger interval) | [2D mode] Maximum speed of 1 kHz (1 ms) [3D mode] - |
| Number of registered inspection settings | Up to 1000 (depending on SD card capacity and setting contents) for each of SD cards 1 and 2. External switching is possible |
| Master profile / number of reference images | Maximum 200 per setting per head (depends on SD card capacity) |
| Memory card | • SD card slot × 2 • Supports OP-87133 (512 MB), CA-SD1G (1 GB), CA-SD4G (4 GB), CA-SD16G (16 GB) *In the SD1 slot, CA-SD4G is equipped as standard for 8000, and CA-SD1G is equipped as standard for 8000E |
| Number of tools | 100/setting (of those, 20 are for misalignment correction) |
| Interface (Control input) | 20 points (input terminal block: 5 points, parallel I/O: 15 points) |
| Interface (Control output) | 28 points (output terminal block: 6 points, parallel I/O: 22 points) Photo MOSFET |
| Interface (RS-232C) | • Value output and control I/O (exclusive use with PLC link using an RS-232C port) • Supports baud rates up to 230,400 bps |
| Interface (PLC link) | • Value output using Ethernet port or RS-232C port, and control I/O (Exclusive use with EtherNet/IP™ and PROFINET. When using an RS-232C port, exclusive use with RS-232C no-procedure communication) |
| Interface (Ethernet) | • Value output and control I/O • In addition to the above functions, can upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Supports FTP client and FTP server functions • Supports VNC server functions (for non-PC clients, only displaying the monitor screen is supported) • Supports BOOTP functions • 1000BASE-T/100BASE-TX/10BASE-T • Supports jumbo frames (when connected to any of CB-NEC20E/NEP20E/NPN20E) |
| Interface (USB) | • Can output values (3D mode only), upload/download inspection settings, perform various simulations, send/receive various data including profile and image data, and be used with remote connection programs via KEYENCE PC application software • Dedicated USB 2.0 |
| Interface (EtherNet/IP™) | • Can input/output numerical values and perform control I/O using the Ethernet port or the optional EtherNet/IP™ unit CB-NEP20E (Cannot be used with PLC Link, PROFINET, and EtherCAT®) • Supports cyclic communication (max. 1436 bytes) and message communication • Maximum number of connections: 32 (Ethernet port)/1: Exclusive Owner, 4: Input Only (CB-NEP20E) • Complies with Version.CT15 (Ethernet port)/CT17 (CB-NEP20E) conformance test |
| Interface (PROFINET) | • Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20EA (Cannot be used with PLC Link, EtherNet/IP, and EtherCAT®) • Supports cyclic communication (max. 1408 bytes) (Ethernet port) / 1252 bytes (CB-NPN20EA) • Supports acyclic communication (recorded data) • Complies with Conformance Class A (Ethernet port) / C (CB-NPN20EA) |
| Interface (EtherCAT ®) | • Can output numerical values and perform control I/O by connecting the optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC link, EtherNet/IP™, and PROFINET) • Supports cyclic communication (process data object communication) (Input: Max. 536 bytes/Output: Max. 532 bytes) • Supports acyclic communication (mailbox communication) • Supports CoE • Explicit Device Identification • Complies with V2.2.10 and V2.2.1.0 conformance test |
| Interface (Mouse) | Various menus can be controlled via the dedicated mouse (included with the controller) |
| Interface (SNTP) | Automatic correction of date and time for this unit is possible by connecting to an SNTP server |
| Interface (USB HDD) | By connecting an HDD (max. 2 TB) to the dedicated USB port (supports USB 3.0, bus-powered, rated output: 900 mA), profile, image and other data can be output |
| Interface (Monitor output) | Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz) |
| Encoder input | 1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V) |
| Response frequency (RS-422) | Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz |
| Response frequency (Open collector (OC)) | Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz |
| Laser ON input | Non-voltage input (Shorted with short pin when shipped from factory) |
| Cooling fan | Provided |
| Minimum display unit | 0.1 µm 0.000004" , 0.01°, 0.00001 mm 2 |
| Language | Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, German, French, Italian, Thai, Czech, Hungarian, and Polish |
| Напряжение питания | 24 V DC ±10% |
| Ratings (Maximum current consumption) | 3.3 A |
| Рабочая температура | 0 to +45°C 32 to +113°F (DIN rail mounting) / 0 to +40°C 32 to +104°F (base surface mounting) |
| Environmental resistance (Relative humidity) | 85% RH or less (no condensation) |
| Масса | Approx. 2500 g |