KE
KEYENCE CORPORATION LS-9501
LS-9000 series (High-speed optical micrometer) - LS-9501
Категории:
Технические характеристики
| Type | Controller: NPN output type |
|---|---|
| No. of connectable sensor heads | 2 |
| Head compatibility | Yes |
| Display (Minimum display unit) | 0.01 µm |
| Display (Display range) | ±99,999.99 µm to ±9,999.9 mm |
| Display (LED display) | POWER ON indicator, ERROR indicator |
| Input terminal block (Encoder input) | NPN/PNP open-collector output, voltage output (5 V/12 V/24 V), line-driver output |
| Input terminal block (Synchronous 1, 2 input) | Non-voltage input |
| Input terminal block (Program selection input) | Non-voltage input x 4 inputs |
| Напряжение питания | ±10 V x 2 outputs, output impedance 100 Ω |
| Output terminal (Analog current output) | 4 to 20 mA x 2 outputs, compatible load max. 350 Ω |
| Output terminal (Universal output) | NPN open-collector output x 10 outputs Measured value and tolerance judgment output, status output allocatable |
| Output terminal (Status 1, 2 output) | NPN open-collector output |
| Output terminal (Error output) | NPN open-collector output (N.C.) |
| Interface (Ethernet) | 1000BASE-T/100BASE-TX |
| Interface (USB) | USB 2.0 HI-SPEED supported (USB 1.1 Full-SPEED compatible) |
| Interface (RS-232C) | Measured value output, control I/O, setting change, baud rate can be selected up to 115,200 bps |
| Interface (Display and settings panel) | LS-D1000 Max. four heads connectable |
| Напряжение питания | 24 VDC ±10 %, including Ripple (P-P) |
| Rating (Current consumption) | When LS-HA100 not used: 1.0 A max. when 1 head connected; 1.4 A max. when 2 heads connected When LS-HA100 in use: 2.0 A max. when 3 heads connected; 2.3 A max. when 4 heads connected |
| Рабочая температура | When LS-HA100 not used: 0 to +50 °C 32 to 122 °F When LS-HA100 in use: 0 to +45 °C 32 to 113 °F |
| Environmental resistance (Relative humidity) | 20 to 85 % RH (No condensation) |
| Масса | Approx. 1,500 g |