KE
KEYENCE CORPORATION SP-CM4
SP-C series (Smart Cushion Valve) - SP-CM4
Категории:
Технические характеристики
| Type | Smart cushion valve Middle type |
|---|---|
| Supported pipe diameter (Pipe outer diameter) | ø4 ø0.16" |
| Материал | Nylon, Polyurethane |
| Supported fluids | Air |
| Supported fluid temperature | -10 to +50°C 14 to 122°F |
| Operating pressure range | 0.2 to 0.8 MPa |
| Pressure resistance | 1.0 MPa |
| Maximum operating frequency | 1 Hz |
| Flow rate characteristics (Before deceleration) | 210 L/min 7.41 CFM |
| Flow rate characteristics (After deceleration) | 90 L/min 3.18 CFM |
| Number of connectable cylinder sensors | 1 |
| Number of outputs | 2 |
| Control output | NPN/PNP switchable, Open-collector output: 30 VDC or less 100 mA max. total for 2 outputs, Residual voltage: 2.5 V or less |
| External input | Short-circuit current: 1.5 mA max. |
| Network function | IO-Link (Specification v1.1/COM3) |
| Напряжение питания | 24 VDC -20 to +25%, ripple included, Class 2 or LPS |
| Power supply (Power consumption) | 1.2 W (50 mA or less at 24 V/62 mA or less at 19.2 V [smart cushion valve only; excluding load current]) |
| Степень защиты (IP) | IP65/IP67 (IEC 60529) |
| Environmental resistance (Protection circuit) | Reverse polarity protection, Power supply surge protection, Output overcurrent protection |
| Рабочая температура | -10 to +50°C 14 to 122°F (no freezing) |
| Environmental resistance (Relative humidity) | Up to 85% RH (no condensation) |
| Environmental resistance (Vibration resistance) | 10 to 500 Hz; Power spectral density: 0.816 G 2 /Hz; X, Y, and Z directions |
| Environmental resistance (Shock resistance) | 100 m/s 2 328.1 ft/s 2 (10 G); 1000 times each for X, Y, and Z axes |
| Материал | Polyamide, Aluminum alloy, FKM, NBR, HNBR, POM |
| Материал | Polyamide, Aluminum alloy, FKM, NBR, HNBR, SUS304, POM, PBT, PAR |
| Масса | Approx. 110 g 3.88 oz |