KE
KEYENCE CORPORATION SP-VC14D6
SP-N/V series (Smart Valve Manifold) - SP-VC14D6
Категории:
Технические характеристики
| Type | Valve unit |
|---|---|
| Valve size | 14 mm 0.55" |
| Valve type | Closed center |
| Размер порта | ø6 ø0.24" |
| Valve structure | Elastomer seal |
| Manual operation | Push-turn lock type (driver operation) |
| Supported fluids | Air |
| Fluid temperature | -5 to +50°C 23 to 122°F (no freezing) |
| Flow rate characteristics | 470 L/min 16.59 CFM |
| Время отклика | 40 ms or less |
| Maximum operating frequency | 3 Hz |
| Operating pressure range (With internal pilot) | 0.3 to 0.8 MPa |
| Operating pressure range (With external pilot) | 0 to 0.8 MPa |
| Pressure resistance | 1.0 MPa |
| Sensor connection port (Connector) | M8 (A-code) 4-pin, female |
| Sensor connection port (Power supply capacity) | 200 mA |
| Sensor connection port (Protection circuit) | Overcurrent protection circuit |
| Sensor connection port (Communication/input) | Switchable between CS-Link and control input |
| Sensor connection port (CS-Link) | CS-LxxPC/CS-LA1C/SP-Cxx; CS-LxxPC: Up to 2 units; SP-Cxx/CS-LA1C: Up to 2 units |
| Sensor connection port (Control input) | PNP/NPN switchable; 2; PNP: 15 V or more, NPN: 6 V or less; PNP: 6 V or less, NPN: 15 V or more; 3 mA or less; Surge protection circuit |
| Current consumption | Without valve operation: 20 mA or less at 24 V; At maximum valve operating frequency (single or double type): 70 mA or less at 24 V; At maximum valve operating frequency (closed center, exhaust center, pressure center, dual 3-port (NC/NC) type): 60 mA or less at 24 V |
| Степень защиты (IP) | IP65/IP67 (IEC 60529) |
| Рабочая температура | -5 to +50°C 23 to 122°F (no freezing) |
| Environmental resistance (Relative humidity) | Up to 85% RH (no condensation) |
| Environmental resistance (Vibration resistance) | 10 to 500 Hz; Power spectral density: 0.204 G 2 /Hz; X, Y, and Z directions |
| Environmental resistance (Shock resistance) | 100 m/s 2 328.1 ft/s 2 (10 G); 1000 times each for X, Y, and Z axes |
| Материал | Polyamide, POM, Aluminum alloy, FKM, HNBR, NBR, Nickel-plated brass / Brass (closed center, exhaust center, and pressure center types only) |
| Материал | Polyamide, PAR, POM, HNBR, NBR, Aluminum alloy, Zinc-nickel plating, SUS304 |
| Масса | Approx. 170 g 6.00 oz |