Mitsubishi Electric Corporation (Factory Automation / FA Systems Group) FX5-80SSC-G
FX5-80SSC-G
Технические характеристики
| Number of control axes | Up to 8 axes |
|---|---|
| Operation cycle (operation cycle settings) *1 | 500 μs, 1000 μs, 2000 μs, 4000 μs |
| Interpolation function | Linear interpolation (up to 4 axes), 2-axis circular interpolation |
| Control method | Positioning control, speed control, speed-torque control, speed-position switching control, fixed-pitch feed, synchronous control, cam control, continuous path control, position-speed switching control |
| Acceleration/deceleration processing | Trapezoidal acceleration/deceleration, S-curve acceleration/deceleration |
| Compensation function | Backlash compensation, electronic gear, near pass function |
| Synchronous control | Synchronous encoder input, command generation axis, cam, phase compensation, cam auto-generation |
| Control unit | mm, inch, degree, pulse |
| Positioning control method | Motion profile table |
| Number of positioning data | 600 data (positioning data No. 1 to 600)/axis (Can be set with MELSOFT GX Works3 or a sequence program.) |
| Backup | Parameters, positioning data, and block start data can be saved on flash ROM (batteryless backup) |
| Home position return | Driver home position return *2 |
| Positioning control | Linear interpolation control (up to 4 axes) *3 , fixed-pitch feed control (up to 4 axes), 2-axis circular interpolation (auxiliary point-specified, central point-specified), speed control (up to 4 axes), speed-position switching control (INC mode, ABS mode), position-speed switching control (INC mode), current value change, NOP instruction, JUMP instruction, LOOP, LEND, block start, condition start, wait start, simultaneous start, repeated start |
| Manual control | JOG operation, inching operation, manual pulse generator operation (up to 1 module) |
| Speed-torque control | Speed control not including position loop, torque control, continuous operation to torque control |
| Absolute position system | Provided (The servo motors are equipped with a batteryless absolute position encoder as standard.) |
| Synchronous encoder operation function | Up to 4 modules (via a CPU or a servo amplifier) |
| Speed limit | Speed limit value, JOG speed limit value |
| Torque limit function | Torque limit value same setting, torque limit value individual setting |
| Forced stop | Via buffer memory, valid/invalid setting |
| Software stroke limit function | Movable range check with feed current value or with machine feed value |
| Hardware stroke limit function | Provided |
| Speed change | Provided |
| Override | 0 to 300 % |
| Acceleration/deceleration processing change | Acceleration/deceleration time |
| Torque limit value change | Provided |
| Target position change function | Speed to a target position address and a target position is changeable. |
| M-code output function | Provided |
| Step function | Deceleration unit step, data No. unit step |
| Skip function | Via a CPU or an external command signal |
| Teaching function | Provided |
| Parameter initialization function | Provided |
| External input signal setting function | Via a CPU or a servo amplifier |
| Mark detection function | Continuous detection mode, specified number of detections mode, ring buffer mode |
| Mark detection signal | Signals for the number of axes of the connected servo amplifiers |
| Mark detection setting | 16 settings |
| Optional data monitor function | Up to 4 points/axis |
| Functional safety | DI/O connection of the servo amplifier *4 |
| Automatic return | Provided |
| Digital oscilloscope function | Bit data: 16 channels, word data: 16 channels *5 |
| Number of connectable stations | Motion control stations: 8, standard stations: 16 |
| Servo amplifier connection method | CC-Link IE TSN |
| CC-Link IE TSN Class | B |
| Maximum distance between stations [m] | CC-Link IE TSN: 100 |
| 24 V DC external current consumption [A] | 0.24 |
| Mass [kg] | 0.30 |
| Exterior dimensions [mm] | 90.0 (H) x 50.0 (W) x 83.0 (D) |
| Category (site listing) | Motion module |