Mitsubishi Electric Corporation (Factory Automation / FA Systems Group) GT2715-XTBA
GT2715-XTBA
Технические характеристики
| Model | GT2715-XTBA |
|---|---|
| Product name | GT27 model |
| Series name | GOT2000 |
| Display device | TFT color LCD |
| Screen size | 15" |
| Resolution | XGA: 1024 x 768 dots |
| Display size | 304.1 (W) x 228.1 (H) mm (11.97 (W) x 8.98 (H) inch) |
| Number of displayed characters | 16-dot standard font: 64 characters x 48 lines (two-byte characters) 12-dot standard font: 85 characters x 64 lines (two-byte characters) |
| Display color | 65536 colors |
| Brightness adjustment | 32 levels |
| Registrable number of screen | 4096 |
| Backlight | LED (not replaceable) |
| Backlight life *4 | Approx. 60000 h (operating ambient temperature: 25°C, display intensity: 50%) |
| Backlight color | White |
| Type | Analog resistive film |
| Key size | Minimum 2 x 2 dots *8 (per key) |
| Simultaneous press | Up to two points |
| Life | 1 million touches or more (operating force: 0.98 N or less) |
| Detection length | 1 m |
| Detection temperature | Temperature difference between human body and ambient air: 4°C or higher |
| User memory | Memory for storage (ROM) *11 : 57 MB Memory for operation (RAM) : 256 MB *12 Life (number of write times) : 100000 times |
| Built-in clock precision | ±90 seconds/month (ambient temperature: 25°C) |
| Battery > Type | GT11-50BAT lithium battery |
| Backup target | SRAM data, clock data, system status log data |
| Battery > Life | Approx. 5 years (ambient temperature: 25°C) |
| Number of channel | 1 channel |
| Transmission speed | 115200, 57600, 38400, 19200, 9600, 4800 bps |
| Connector shape | D-sub 9-pin (male) |
| Built-in interface > RS-422/485 > Connector shape | D-sub 9-pin (female) |
| Built-in interface > RS-422/232 > Number of channel | － |
| Built-in interface > RS-422/232 > Transmission speed | － |
| Built-in interface > RS-422/232 > Connector shape | － |
| Application | － |
| Built-in interface > RS-422 > Number of channel | － |
| Built-in interface > RS-422 > Transmission speed | － |
| Built-in interface > RS-422 > Connector shape | － |
| Data transfer method | 100BASE-TX, 10BASE-T |
| Built-in interface > Ethernet > Connector shape | RJ45 (modular jack) AUTO MDI/MDI-X |
| Built-in interface > Bus interface > Type | － |
| Built-in interface > Bus interface > Number of channel | － |
| RGB interface | － |
| Printer interface | － |
| Built-in interface > USB (host) > Number of channel | 2 channels (front face, rear face) |
| Maximum transfer rate | High-Speed 480 Mbps |
| Built-in interface > USB (host) > Connector shape | USB-A |
| Built-in interface > USB (device) > Number of channel | 1 channel (front face) |
| Built-in interface > USB (device) > Connector shape | USB Mini-B |
| SD memory card *11 | 1 channel, SDHC compliant (maximum 32 GB) |
| CF card interface | － |
| PC card interface | － |
| Option function board interface | － |
| Memory board interface | － |
| Extension interface | For installing a communication unit or an option unit |
| Auxiliary extension interface | For installing an option unit |
| Extension unit interface | － |
| Side interface | For installing a communication unit |
| Sound output interface | － |
| Buzzer sound | Single tone (tone and tone length adjustable) |
| POWER LED | 2 colors (blue and orange) |
| Installation method | Standard |
| Panel color | Black |
| Protective structure *5 | Front: IP67F *6 *9 Inside control panel: IP2X |
| External dimensions | 397 (W) x 300 (H) x 60 (D) mm (15.63 (W) x 11.81 (H) x 2.36 (D) inch) |
| Panel cut dimensions | 383.5 (W) x 282.5 (H) mm (15.10 (W) x 11.12 (H) inch) |
| Масса | 4.5 kg (9.9 lb) |
| Ambient operating temperature | 0°C to 55°C |
| Ambient storage temperature | -20°C to 60°C |
| Ambient operating humidity | 10% RH to 90% RH, non-condensing |
| Ambient storage humidity | 10% RH to 90% RH, non-condensing |
| Approval standards | Compliant with JIS B 3502 and IEC 61131-2 *13 |
| Under intermittent vibration | [ Frequency: 5 to 8.4 Hz ] Half amplitude: 3.5 mm Sweep count: 10 times in each X, Y, or Z direction [ Frequency: 8.4 to 150 Hz ] Acceleration: 9.8 m/s 2 Sweep count: 10 times in each X, Y, or Z direction |
| Under continuous vibration | [ Frequency: 5 to 8.4 Hz ] Half amplitude: 1.75 mm [ Frequency: 8.4 to 150 Hz ] Acceleration: 4.9 m/s 2 |
| Shock resistance | Compliant with JIS B 3502 and IEC 61131-2 (147 m/s 2 (15 G), 3 times in each X, Y, or Z direction) *13 |
| Operating atmosphere | No greasy fumes, corrosive gas, flammable gas, excessive conductive dust, and direct sunlight (as well as at storage) |
| Operating altitude | 2000 m or less |
| Installation location | Inside control panel |
| Напряжение питания | II or less |
| Pollution degree | 2 or less |
| Cooling method | Self-cooling |
| Grounding | Grounding with a ground resistance of 100 Ω or less by using a ground cable that has a cross-sectional area of 2 mm 2 or more. If impossible, connect the ground cable to the control panel. |
| Remarks > Ambient operating temperature | Includes the temperature inside the enclosure of the control panel to which the GOT is installed. |
| Remarks | When any of the following units or option is mounted, the maximum operating ambient temperature must be 5°C lower than the one described in the general specifications: multimedia unit (GT27-MMR-Z), MELSECNET/H communication unit (GT15-J71LP23-25, GT15-J71BR13), CC-Link communication unit (GT15-J61BT13), protective cover for oil. |
| Remarks > Operating altitude | Do not use or store the GOT under a pressure higher than the atmospheric pressure at altitude 0 m. Doing so may cause a malfunction. Air purging by applying pressure to the control panel may create clearance between the surface sheet and the touch panel. This may cause the touch panel to be not sensitive enough or the sheet to come off. |
| Напряжение питания | This indicates the section of the power supply to which the equipment is assumed to be connected between the public electrical power distribution network and the machinery within the premises. Category II applies to equipment that is supplied with power from fixed facilities. The withstand surge voltage for the equipment with the rated voltage up to 300 V is 2500 V. |
| Remarks > Pollution degree | This indicates the occurrence rate of conductive material in an environment where a device is used. Pollution degree 2 indicates an environment where only non-conductive pollution occurs normally and a temporary conductivity caused by condensation shall be expected depending on the conditions. |
| Напряжение питания | 100 V AC to 240 V AC (+10%, -15%) |
| Power supply frequency | 50 Hz/60 Hz (±5%) |
| Maximum apparent power | 140 VA |
| Under the maximum load | 51 W or less |
| Main unit | 25 W |
| Main unit (backlight OFF) | 10 W |
| Inrush current | 40 A or less (3 ms, ambient temperature: 25°C, under the maximum load) |
| Permissible instantaneous power failure time | 20 ms or less (100 V AC or more) |
| Noise immunity | Noise voltage: 1500 Vp-p, noise width: 1 μs, measured by a noise simulator with noise frequency ranging from 25 Hz to 60 Hz |
| Напряжение питания | 1500 V AC for 1 minute across power terminals and earth |
| Insulation resistance | 500 V DC across power terminals and earth, 10 MΩ or more by an insulation resistance tester |
| Applicable wire | 0.75 mm 2 to 2 mm 2 |
| Applicable solderless terminal | Solderless terminal for M3 screw RAV1.25-3, V2-S3.3, V2-N3A, FV2-N3A |
| Applicable tightening torque (for terminal block terminal screws) | 0.5 N・m to 0.8 N・m |
| Category (site listing) | 15" |