NZ2GNCE3-32D

Mitsubishi Electric Corporation (Factory Automation / FA Systems Group) NZ2GNCE3-32D

NZ2GNCE3-32D

Технические характеристики

Input typeDC input (positive common type)
Number of input points32 points
Напряжение питания24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Rated input current6.6 mA TYP. (24 V DC)
Maximum number of simultaneous input points100 %
Напряжение питания11 V DC or more/4 mA or more
Напряжение питания5 V DC or less/1.5 mA or less
Input resistance3.3 kΩ
OFF to ON0 ms, 0.2 ms, 1 ms, 1.5 ms, 5 ms, 10 ms, 20 ms, 70 ms
ON to OFF0 ms, 0.2 ms, 1 ms, 1.5 ms, 5 ms, 10 ms, 20 ms, 70 ms
Input common terminal arrangement32 points/common (3-wire, sensor connector (e-CON) type)
Напряжение питанияBetween all DC external terminals and ground: 510 V AC for 1 minute
Insulation resistanceBetween all DC external terminals and ground: 10 MΩ or higher by 500 V DC insulation resistance tester
Protection degreeIP2X
Station typeCC-Link IE TSN Communication Mode: Remote station CC-Link IE Field Network Communication Mode: Intelligent device station
CC-Link IE TSN ClassCC-Link IE TSN Class B CC-Link IE TSN Class A
CC-Link IE TSN Class BProtocol version 2.0/1.0
CC-Link IE TSN Class AProtocol version 2.0
Время отклика512 µs
Network topologyLine topology, star topology (Coexistence of line topology and star topology is possible.), and ring topology
Multicast filterAvailable
RX/RY points32 points
RWr/RWw points4 points
Напряжение питания24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)
Current110 mA or less (at 24 V DC, all points ON)
External interfaceCommunication part: RJ45 connector Module power supply part: One-touch connector plug for power supply and FG I/O part: Sensor connector (e-CON)
Height54.5 mm
Width200 mm
Depth46 mm
Масса0.25 kg
Data transmission speed1 Gbps/100 Mbps
Communication mode1000BASE-T: Full-duplex 100BASE-TX: Full-duplex
InterfaceRJ45 (AUTO MDI/MDI-X)
Maximum frame size1518 bytes
Maximum segment length100 m
Number of cascaded connectionsConsult the manufacturer of the switching hub used.
IP versionIPv4
Рабочая температура0...55 ˚C
Storage ambient temperature-25...75 ˚C
Operating ambient humidity5...95 %RH, non-condensing
Storage ambient humidity5...95 %RH, non-condensing
Under intermittent vibrationFrequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s 2 Sweep count: 10 times each in X, Y, and Z directions
Under continuous vibrationFrequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s 2
IEC 61131-2: 2007/JIS B 3502: 2011Three shocks in each direction per axis, on 3 mutually perpendicular axes (total of 18 shocks)
Operating atmosphereNo corrosive gases, flammable gases, less conductive dust
Operating altitude0...2000 m
Installation locationInside a control panel
Напряжение питанияII or less
Pollution degree2 or less
Equipment classClass I
Category (site listing)Remote I/O
Получить предложение по этой позиции