Mitsubishi Electric Corporation (Factory Automation / FA Systems Group) Q00JCPU-E
Q00JCPU-E
Технические характеристики
| Control method | Stored program cyclic operation |
|---|---|
| I/O control mode | Refresh mode (The direct access input/output is available by specifying the direct access input/output (DX, DY).) |
| Sequence control language | Relay symbol language, logic symbolic language, MELSAP3 (SFC), MELSAP-L, function block and structured text (ST) |
| LD X0 | 200 ns |
| MOV D0 D1 | 700 ns |
| Constant scan | 1...2000 ms (setting is available in increments of 1 ms by parameter) |
| Program capacity | 8K steps (32K bytes) |
| Program memory (drive 0) | 58K bytes |
| Standard ROM (drive 4) | 58K bytes |
| Program memory | 6 |
| Standard ROM | 6 |
| Initial setting | 512 parameters |
| Refresh | 256 parameters |
| Number of I/O device points | 2048 points (X/Y0...7FF) |
| Number of I/O points | 256 points (X/Y0...FF) |
| Internal relay (M) | 8192 points (M0...8191) by default (changeable) |
| Latch relay (L) | 2048 points (L0...2047) by default (changeable) |
| Link relay (B) | 2048 points (B0...7FF) by default (changeable) |
| Timer (T) | 512 points (T0...511) by default (changeable) (Low-speed and high-speed timers available) Low-speed or high-speed is specified by an instruction. The measurement unit is set by parameter. (Low-speed timer: 1...1000 ms (in increments of 1 ms), default: 100 ms) (High-speed timer: 0.1...100.0 ms (in increments of 0.1 ms), default: 10.0 ms) |
| Retentive timer (ST) | 0 points by default (changeable) (Low-speed and high-speed retentive timers available) Low-speed or high-speed is specified by an instruction. The measurement unit is set by parameter. (Low-speed retentive timer: 1...1000 ms (in increments of 1 ms), default: 100 ms) (High-speed retentive timer: 0.1...100.0 ms (in increments of 0.1 ms), default: 10.0 ms) |
| Counter (C) | Normal counter: 512 points (C0...511) by default (changeable) Interrupt counter: 128 points max. (0 points by default, setting by parameters) |
| Data register (D) | 11136 points (D0...11135) by default (changeable) |
| Link register (W) | 2048 points (W0...7FF) by default (changeable) |
| Annunciator (F) | 1024 points (F0...1023) by default (changeable) |
| Edge relay (V) | 1024 points (V0...1023) by default (changeable) |
| Link special relay (SB) | 1024 points (SB0...3FF) (The number of device points is fixed.) |
| Link special register (SW) | 1024 points (SW0...3FF) (The number of device points is fixed.) |
| Step relay (S) | 2048 points (S0...127/block) (The number of device points is fixed.) |
| Index register (Z) | 10 points (Z0...9) (The number of device points is fixed.) |
| Pointer (P) | 300 points (P0...299) (The number of device points is fixed.) |
| Interrupt pointer (I) | 128 points (I0...127) (The number of device points is fixed.) (The fixed scan interval for the system interrupt pointer I28 to 31 can be set by parameter.) 2...1000 ms (in increments of 1 ms) Default I28: 100 ms, I29: 40 ms, I30: 20 ms, I31: 10 ms |
| Special relay (SM) | 1024 points (SM0...1023) (The number of device points is fixed.) |
| Special register (SD) | 1024 points (SD0...1023) (The number of device points is fixed.) |
| Function input (FX) | 16 points (FX0...F) (The number of device points is fixed.) |
| Function output (FY) | 16 points (FY0...F) (The number of device points is fixed.) |
| Function register (FD) | 5 points (FD0...4) (The number of device points is fixed.) |
| Link direct device | Device that directly accesses the link device of a network module Specification format: J□□\X□□, J□□\Y□□, J□□\SB□□, J□□\W□□, J□□\SW□□ |
| Intelligent function module device | Device that directly accesses the buffer memory of an intelligent function module Specified form: U...\G... |
| Latch (data retention during power failure) range | 2048 points (L0...2047) by default (The latch range can be set for the devices, B, F, V, T, ST, C, D, and W.) |
| RUN/PAUSE contact | One contact can be set up in X0 to X7FF for each of RUN and PAUSE. |
| Clock function | Year, month, date, hour, minute, second, and day of week (automatic leap year detection) Accuracy: -3.20...+5.27 s (TYP. +1.98 s)/d at 0 ˚C Accuracy: -2.57...+5.27 s (TYP. +2.22 s)/d at 25 ˚C Accuracy: -11.68...+3.65 s (TYP. -2.64 s)/d at 55 ˚C |
| Allowable momentary power failure time | Within 20 ms (100 V AC or more) |
| Internal current consumption (5 V DC) | 0.26 A |
| Height | 98 mm |
| Width | 245 mm |
| Depth | 98 mm |
| Масса | 0.66 kg |
| Напряжение питания | 100...240 V AC (-15 %...+10 %) |
| Input frequency | 50/60 Hz ±5 % |
| Напряжение питания | Within 5 % |
| Maximum input apparent power | 105 VA |
| Inrush current | 40 A, within 8 ms |
| 5 V DC | 3 A |
| Overcurrent protection > 5 V DC | 3.3 A or more |
| Напряжение питания | 5.5...6.5 V |
| Efficiency | 65 % or more |
| Напряжение питания | Between the input and LG batched terminal and the output and FG batched terminal, 2300 V AC per minute (altitude 0...2000 m) |
| Insulation resistance | Input and LG batched, output and FG batched, batch input-LG, batch output-FG: 10 MΩ or higher by 500 VDC insulation resistance tester |
| Operation indication | LED indication (The POWER LED of the CPU part: Normal: On (green), Error: Off) |
| Fuse | Built-in (user-unchangeable) |
| Contact output section | None |
| External interface | Terminal block (M3.5 screw) |
| Number of mountable I/O modules | 5 |
| Applicable module | MELSEC-Q series modules |
| Рабочая температура | 0...55 ˚C |
| Storage ambient temperature | -25...75 ˚C |
| Operating ambient humidity | 5...95 %RH, non-condensing |
| Storage ambient humidity | 5...95 %RH, non-condensing |
| Under intermittent vibration | Frequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s 2 Sweep count: 10 times each in X, Y, Z directions |
| Under continuous vibration | Frequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s 2 |
| Shock resistance | Compliant with JIS B 3502 and IEC 61131-2 (147 m/s 2 , 3 times each in 3 directions X, Y, Z) |
| Operating atmosphere | No corrosive gases |
| Operating altitude | 0...2000 m |
| Installation location | Inside a control panel |
| Напряжение питания | II or less |
| Pollution degree | 2 or less |
| Equipment class | Class I |
| Category (site listing) | Programmable controller CPU |