Q24DHCCPU-LS

Mitsubishi Electric Corporation (Factory Automation / FA Systems Group) Q24DHCCPU-LS

Q24DHCCPU-LS

Технические характеристики

Operating systemFor "-LS", consult with the partner (operating system vendor).
Programming languageFor "-LS", consult with the partner (operating system vendor).
SystemSH4A
UserIntel ® Atom™ Processor
Endian formatLittle endian
Work RAM512M bytes
Built-in SSD512M bytes
Battery backup RAM5M bytes
InterfaceSD/SDHC memory card (up to 16G bytes)
Power supply+3.3 V DC, up to 200 mA
User Ethernet port (CH1, CH2) > Interface10BASE-T/100BASE-TX/1000BASE-T
Communication methodFull-duplex/half-duplex
Data transmission speed10 Mbps (10BASE-T)/100 Mbps (100BASE-TX)/1000 Mbps (1000BASE-T)
Transmission methodBase band
Maximum segment length100 m
Connector applicable to external wiringRJ45
Supported functionAuto-negotiation function (automatic recognition of communication speed/communication method) Auto-MDI/MDIX (automatic recognition of straight/crossing cable)
System Ethernet port (S CH1) > Interface10BASE-T/100BASE-TX
System Ethernet port (S CH1) > Data transmission speed10 Mbps (10BASE-T)/100 Mbps (100BASE-TX)
Analog RGB output connectorD-sub 15-pin
RS-232 connector (CH3) specifications > InterfaceCompliant with RS-232
Synchronization methodStart-stop synchronization method
Transmission speed9600, 14400, 19200, 28800, 38400, 57600, 115200 bps
Transmission distanceUp to 15 m
Start bit1
Data bit7 / 8
Parity bits1 / None
Stop bit1 / 2
Parity checkYes (Even/Odd)/No
Sum check codeYes/No
Transmission controlFlow control (RS/CS control)
RS-232 connector (CH3) specifications > Connector applicable to external wiringRound connector (10-pin)
USB connector (USB1) specifications > InterfaceUSB 2.0 compatible
ConnectorConnector type A
USB connector (USB1) specifications > Transmission speed480 Mbps (High Speed)
USB connector (USB1) specifications > Power supplyBus power +5 V DC, up to 500 mA
Supported standardConsult with the partner (operating system vendor).
USB connector (USB2) specifications > InterfaceUSB 2.0 compatible
USB connector (USB2) specifications > ConnectorConnector type mini-B
USB connector (USB2) specifications > Transmission speed12 Mbps (Full Speed)
USB connector (USB2) specifications > Power supplySelf-Powered
PCI Express ® expanded connector specifications > InterfacePCI Express ® standards
Link width× 1
PCI Express ® expanded connector specifications > Transmission speed2.5 Gbps
Number of I/O points4096 points (X/Y0...FFF)
Displayed informationYear, month, date, hour, minute, second, and day of week (automatic leap year detection)
AccuracyDaily error: -10.89...+8.46 s (0...55 ˚C) Daily error: -4.32...+5.25 s (25 ˚C)
Allowable momentary power failure timeThe time differs depending on the power supply module used.
Internal current consumption (5 V DC)2.8 A
Height98 mm
Width83 mm
Depth115 mm
Масса0.638 kg
Рабочая температура0...55 ˚C
Storage ambient temperature-25...75 ˚C
Operating ambient humidity5...95 %RH, non-condensing
Storage ambient humidity5...95 %RH, non-condensing
Under intermittent vibrationFrequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s 2 Sweep count: 10 times each in X, Y, Z directions
Under continuous vibrationFrequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s 2
Shock resistanceCompliant with JIS B 3502 and IEC 61131-2 (147 m/s 2 , 3 times each in 3 directions X, Y, Z)
Operating atmosphereNo corrosive gases
Operating altitude0...2000 m
Installation locationInside a control panel
Напряжение питанияII or less
Pollution degree2 or less
Equipment classClass I
Category (site listing)C Controller CPU
Получить предложение по этой позиции