Mitsubishi Electric Corporation (Factory Automation / FA Systems Group) QS061P-A2
QS061P-A2
Технические характеристики
| Installation position | QS series power supply module installation slot |
|---|---|
| Applicable base unit | QS034B |
| Напряжение питания | 200...240 V AC (-15 %...+10 %) |
| Input frequency | 50/60 Hz ±5 % |
| Напряжение питания | Within 5 % |
| Maximum input apparent power | 125 VA |
| Inrush current | 20 A, within 8 ms |
| 5 V DC | 6 A |
| Overcurrent protection > 5 V DC | 6.6 A or more |
| Напряжение питания | 5.5...6.5 V |
| Efficiency | 70 % or more |
| Allowable momentary power failure time | Within 20 ms |
| Напряжение питания | Between input-LG batched and output-FG batched, 2830 V AC rms/3 cycles (altitude 2000 m) |
| Insulation resistance | Input and LG batched, output and FG batched, batch input-LG, batch output-FG: 10 MΩ or higher by 500 VDC insulation resistance tester |
| Operation indication | LED (Normal: On (green), error: Off) |
| Fuse | Built-in (user-unchangeable) |
| Application | ERR. contact |
| Напряжение питания | 24 V DC, 0.5 A |
| Minimum switching load | 5 V DC, 1 mA |
| OFF to ON | 10 ms or less |
| ON to OFF | 12 ms or less |
| Mechanical | 20 million times or more |
| Electrical | Rated switching voltage/current load: More than 100 thousand times |
| Surge suppressor | None |
| Contact output section > Fuse | None |
| External interface | Terminal block (M3.5 screw) |
| Height | 98 mm |
| Width | 55.2 mm |
| Depth | 115 mm |
| Масса | 0.40 kg |
| General specifications | Refer to the general specifications of the CPU module. |
| Category (site listing) | Power supply |