Mitsubishi Electric Corporation (Factory Automation / FA Systems Group) R12CCPU-V
R12CCPU-V
Технические характеристики
| Operating system | VxWorks Version 6.9 |
|---|---|
| Programming language | C language (C/C++) |
| MPU | ARM ® Cortex-A9 Dual Core |
| Endian format | Little endian |
| Work RAM | 256M bytes |
| ROM | 16M bytes (program memory: 8M bytes, data memory: 8M bytes) |
| Backup RAM | 4096K bytes (File storage area for device/label memory: 358K bytes, for system: 512K bytes) |
| Interface | SD/SDHC memory card (up to 16G bytes) |
| Power supply | +3.3 V DC, up to 200 mA |
| Number of channels | 2 |
| Ethernet port > Interface | 10BASE-T/100BASE-TX/1000BASE-T |
| Data transmission speed | 10 Mbps (10BASE-T), 100 Mbps (100BASE-TX), 1000 Mbps (1000BASE-T) |
| Number of cascaded connections | Maximum 4 stages (10BASE-T)/Maximum 2 stages (100BASE-TX) |
| Maximum segment length | 100 m |
| Communication method | Full-duplex/half-duplex |
| Transmission method | Base band |
| Connector applicable to external wiring | RJ45 |
| Supported function | Auto-negotiation function (automatic recognition of communication speed/communication method) Auto-MDI/MDI-X (automatic recognition of straight/crossing cable) |
| IP version | IPv4 |
| RS-232 connector > Number of channels | 1 |
| RS-232 connector > Interface | RS-232-compliant |
| Synchronization method | Start-stop synchronization method |
| Transmission speed | 9600, 14400, 19200, 28800, 38400, 57600, 115200 bps |
| Transmission distance | Up to 15 m |
| Start bit | 1 |
| Data bit | 7/8 |
| Parity bits | 1/None |
| Stop bit | 1/2 |
| Parity check | Yes (even/odd)/None |
| Sum check code | Yes/None |
| Transmission control | Flow control (RS/CS control) |
| USB connector > Interface | USB 2.0 compatible |
| Connector | Type A |
| USB connector > Transmission speed | 480 Mbps (High Speed) |
| USB connector > Power supply | Bus power +5 V DC, up to 500 mA |
| Supported standard | USB mass storage class (up to 2T bytes) |
| Number of occupied I/O points | 4096 points |
| Displayed information | Year, month, date, hour, minute, second, and day of week (automatic leap year detection) |
| Accuracy | Daily error: -5.86...+3.35 s (0...55 ˚C) Daily error: -1.71...+3.35 s (25 ˚C) |
| Allowable momentary power failure time | The time differs depending on the power supply module used. |
| Internal current consumption (5 V DC) | 1.26 A |
| Height | 106 mm |
| Width | 56 mm |
| Depth | 110 mm |
| Масса | 0.35 kg |
| Рабочая температура | 0...55 ˚C (When an extended temperature range base unit is not used) 0...60 ˚C (When an extended temperature range base unit is used) |
| Storage ambient temperature | -25...75 ˚C |
| Operating ambient humidity | 5...95 %RH, non-condensing |
| Storage ambient humidity | 5...95 %RH, non-condensing |
| Under intermittent vibration | Frequency: 5...8.4 Hz, Half amplitude: 3.5 mm Frequency: 8.4...150 Hz, Constant acceleration: 9.8 m/s 2 Sweep count: 10 times each in X, Y, and Z directions |
| Under continuous vibration | Frequency: 5...8.4 Hz, Half amplitude: 1.75 mm Frequency: 8.4...150 Hz, Constant acceleration: 4.9 m/s 2 |
| IEC 61131-2: 2007/JIS B 3502: 2011 | Three shocks in each direction per axis, on 3 mutually perpendicular axes (total of 18 shocks) |
| Operating atmosphere | No corrosive gases, flammable gases, less conductive dust |
| Operating altitude | 0...2000 m |
| Installation location | Inside a control panel |
| Напряжение питания | II or less |
| Pollution degree | 2 or less |
| Category (site listing) | C Controller CPU |