Pepperl+Fuchs SE HICTB08-YRS-RRB-KS-CC-AI16
Termination Board
Технические характеристики
| Connection | X20: terminals 1(+), 2(-) |
|---|---|
| Напряжение питания | 24 V DC , in consideration of rated voltage of used isolators |
| Напряжение питания | 0.9 V , voltage drop across the series diode on the termination board must be considered |
| Ripple | ≤ 10 % |
| Fusing | 2 A , in each case for 8 modules |
| Power dissipation | ≤ 500 mW , without modules |
| Reverse polarity protection | yes |
| Supply | Redundancy available. The supply for the isolators is decoupled, monitored and fused. |
| Output type | volt-free transistor output , not short-circuit protected , not overload protected |
| Напряжение питания | 30 V DC |
| Rated current | 100 mA |
| Signal level | no fault: (external voltage) - 1 V max. for 100 mA (Tamb= 25 °C (77 °F))power supply fault: blocked output (off-state current ≤ 10 µA) |
| Display elements | LED PWR1 (termination board power supply), green LEDLED PWR2 (termination board power supply), green LED |
| Electromagnetic compatibility - Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility | NE 21:2017For further information see system description. |
| Degree of protection | IP20 |
| Рабочая температура | -20 ... 60 °C (-4 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Connection - Field side | explosion hazardous area: spring terminals , blue |
| Connection - Control side | non-explosion hazardous area: Yokogawa system connector, 40-pin |
| Connection - Supply | pluggable screw terminals , black |
| Connection - Fault output | pluggable screw terminals , black |
| Core cross section | spring terminals:rigid: 0.2 ... 2.5 mm2flexible: 0.25 ... 1.5 mm2 |
| Материал | housing: polycarbonate |
| Mass | approx. 480 g |
| Dimensions | 205 x 175 x 153 mm (8.1 x 6.9 x 6.02 inch) (W x H x D) , depth including module assembly |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Сертификация | CESI 06 ATEX 022 |
| Marking | II (1)G [Ex ia Ga] IIC[exsign] II (1)D [Ex ia Da] IIIC[exsign] I (M1) [Ex ia Ma] I |
| Напряжение питания | 250 V (Attention! Umis no rated voltage.) |
| Galvanic isolation - Field circuit/control circuit | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity - Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 50303:2000 |
| Сертификация | IECEx CES 06.0003 |
| IECEx approval - IECEx marking | [Ex ia Ga] IIC[Ex ia Da] IIIC[Ex ia Ma] I |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |