Pepperl+Fuchs SE LRP1.D.S1OX.B.1
Control Unit Ex e, Polyamide, Control Switch
Технические характеристики
| Напряжение питания | 250 V max. |
|---|---|
| Operating current | 13 A max. |
| Terminal capacity | 2.5 mm2 |
| Terminal torque | 0.8 Nm |
| Function | control switch, large |
| Color | black |
| Shroud | yes |
| Contact configuration | 2x NO |
| Switching configuration | 2 position changeover with left OFF |
| Usage category | IEC / EN 60947 |
| Number of poles | 2 |
| Operator action | engage - engage |
| Lockable | padlockable in '0' |
| Labeling | 0 - I |
| Enclosure range | LRP |
| Enclosure cover | fully detachable |
| Cover fixing - Screws | M4 stainless steel combination Phillips and slotted screw |
| Cover fixing - Number | 4 |
| Cover fixing - Tightening torque | 1.5 Nm |
| Degree of protection | EN60529 |
| Cable entry | thru-holes |
| Cable entry face B - M20 quantity | 1 |
| Cable entry face B - M20 series | Cable Glands, Plastic |
| Cable entry face B - M20 type | CG.PEDS1.M20.* |
| Cable entry face B - M20 clamping range | 6 ... 12 mm |
| Defined entry area | face B |
| Материал | Polyamide (PA) |
| Материал | inherent color black |
| Материал | one piece closed cell silicone |
| Mass | approx. 0.52 kg |
| Dimensions - External dimension (A) | 90 mm |
| Dimensions - External dimension (B) | 88 mm |
| Dimensions - External dimension (C) | 85 mm |
| Dimensions - External dimension with operating element (C1) | 114.3 mm |
| Dimensions - Mounting holes distance (G) | 50 mm |
| Dimensions - Mounting holes distance (H) | 72.5 mm |
| Dimensions - Mounting holes diameter (J) | 5.6 mm |
| Tightening torque - Nut torque at enclosure (SW1) | see datasheets of cable glands |
| Mounting | 2 screws |
| Grounding | 2x 2.5mm² grounding terminal |
| Рабочая температура | -40 ... 55 °C (-40 ... 131 °F) @ T4-40 ... 40 °C (-40 ... 104 °F) @ T6 |
| Сертификация | CML 16 ATEX 3009X |
| Marking | II 2 GDEx db eb IIC T* GbEx tb IIIC T** °C DbT4/T130 °C @ Ta +55 °C( T6/T80 °C @ Ta +40 °C on request ) |
| IECEx approval | IECEx CML 16.0008X |
| UKCA approval | CML 22 UKEX 2550X |
| Further approvals | further on request |
| CE marking | 0080 or 0102, see type label |
| Order information | This device will be delivered completely configured and assembled ready for use. For configuration details please contact Customer Service. |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Optional accessories | engraved traffolyte tag labelengraved AISI 316L stainless steel tag labelcolor in-fill stainless steel tag label |