Pepperl+Fuchs SE NBN3-F31K2M-Z8L-B13-S-3G-3D
Inductive sensor
Категории:
Технические характеристики
| Switching function | 2 x normally open (NO) |
|---|---|
| Output type | Two-wire with minimum off-state current |
| Rated operating distance | 2.5 mm |
| Installation | for non-flush mounting |
| Output polarity | DC |
| Assured operating distance | 0 ... 2.05 mm |
| Напряжение питания | 6 ... 30 V |
| Switching frequency | 0 ... 100 Hz |
| Hysteresis | typ. 0.5 mm |
| Reverse polarity protection | yes, with reversed output LED is out of function, therfore more power for solenoid valve |
| Short-circuit protection | no |
| Напряжение питания | ≤ 6 V |
| Operating current | 4 ... 100 mA |
| Off-state current | 100 ... 200 µA typ. 160 µA |
| MTTFd | 684 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Напряжение питания | max. 32 V DC |
| Current | max. 240 mA |
| Standard conformity - Standards | EN IEC 60947-5-2 |
| IECEx approval - Equipment protection level Gc | IECEx TUR 20.0062X |
| IECEx approval - Equipment protection level Dc | IECEx TUR 20.0068X |
| ATEX approval - Equipment protection level Gc | TÜV 20 ATEX 8592 X |
| ATEX approval - Equipment protection level Dc | TÜV 20 ATEX 8598 X |
| CCC approval - Hazardous Location | 20243223150059792024322315005980 |
| Рабочая температура | -40 ... 75 °C (-40 ... 167 °F) , restriction for use in hazardous area, see instruction manual |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type | screw terminals |
| Connection (system side) | screw terminals , M20 x 1.5 cable gland , usable thread length 13.5 mm , screw-in depth max. 13.5 mmground connection with earthing screw only for wire cross-section 4 mm2, use solid wire or stranded wire with wire end ferrule |
| Connection (valve side) | screw terminal ,Cable gland M20 x 1.5 |
| Материал | PC (glass-fiber-reinforced Makrolon) |
| Housing base | powder coated aluminum |
| Degree of protection | IP67 ; additional degree of protection IP66/IP69 with BT65-F31K2-RG-EN-01 and SH-F31K2-B13 |
| Terminal assembly - Number | 10 |
| Terminal assembly - Connection type | For connection of copper wires with 7 mm dismantle lengthTightening torque 0.5 ... 0.6 Nm |
| Terminal assembly - Type | Screw terminal block, pluggable |
| Terminal assembly - Terminal capacity | Conductor cross-section 0,25 ... 2,5 mm2, flexible/rigidFor Multiple-wire connection: two wires of equal cross-section per 0.25 ... 1 mm2 |
| Tightening torque, fastening screws | ≤ 5 Nm |
| Tightening torque, housing screws | 1.5 Nm |
| Tightening torque, earthing screw | 1.5 Nm |
| Tightening torque, cable gland | M20 x 1.5 ; max. 11 Nm |
| Tightening torque, stopping plug | 2 Nm |
| Dimensions - Height | 53 mm |
| Dimensions - Width | 100 mm |
| Dimensions - Length | 106 mm |
| Use in the hazardous area | see instruction manuals |