Pepperl+Fuchs SE NBN4-8GM35-E2
Inductive sensor
Категории:
Технические характеристики
| Switching function | Normally open (NO) |
|---|---|
| Output type | PNP |
| Rated operating distance | 4 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 3.24 mm |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2)8 mm x 8 mm x 1 mm |
| Reduction factor rAl | 0.5 |
| Reduction factor rCu | 0.4 |
| Reduction factor r304 | 0.75 |
| Reduction factor rBrass | 0.5 |
| Напряжение питания | 5 ... 30 V |
| Switching frequency | 0 ... 4500 Hz |
| Hysteresis | typ. 5% |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Напряжение питания | ≤ 1.5 V |
| Operating current | 0 ... 100 mA |
| Off-state current | 0 ... 0.2 mA |
| No-load supply current | ≤ 10 mA |
| Time delay before availability | ≤ 100 ms |
| Switching state indicator | LED, yellow |
| MTTFd | 960 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standard conformity - Standards | EN IEC 60947-5-2 |
| UL approval | cULus ListedLoad Type: General PurposeCircuitry: Class 2 Power SourceEnclosure Type Rating: Type 1Supply/Switching Voltage: 30 V DCOutput Switching Current: 100 mA |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Рабочая температура | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type | cable |
| Материал | brass, nickel-plated |
| Sensing face | LCP |
| Degree of protection | IP65 / IP66 / IP67 |
| Cable - Wire end ferrules | yes |
| Cable - Cable diameter | 3.5 mm ± 0.1 mm |
| Cable - Bending radius | > 10 x cable diameter |
| Материал | PVC |
| Cable - Color | black |
| Cable - Number of cores | 3 |
| Cable - Core cross section | 0.14 mm2 |
| Cable - Length | 2 m |
| Dimensions - Length | 35 mm |
| Dimensions - Diameter | 8 mm |
| Scope of delivery | 2 hex nuts included |