Pepperl+Fuchs SE NCB1,5-18GM60-E2-D
Inductive sensor
Категории:
Технические характеристики
| Switching function | Normally open (NO) |
|---|---|
| Output type | PNP |
| Rated operating distance | 1.5 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 1.22 mm |
| Reduction factor r304 | 0.5 |
| Напряжение питания | 10 ... 60 V DC |
| Switching frequency | 0 ... 1500 Hz |
| Hysteresis | 1 ... 10 % typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Напряжение питания | ≤ 2.5 V |
| Operating current | 0 ... 200 mA |
| No-load supply current | ≤ 10 mA |
| Operating pressure | 350 bar (5076.4 psi) |
| MTTFd | 1240 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standard conformity - Standards | EN IEC 60947-5-2 |
| UL approval | cULus ListedLoad Type: General PurposeCircuitry: Class 2 Power SourceEnclosure Type Rating: Type 1Supply/Switching Voltage: 60 V DCOutput Switching Current: 200 mA |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Рабочая температура | -35 ... 80 °C (-31 ... 176 °F) |
| Connection type | cable |
| Материал | Stainless steel 1.4305 / AISI 303 |
| Sensing face | Epoxy (black) |
| Degree of protection | IP67 |
| Cable - Wire end ferrules | yes |
| Cable - Cable diameter | 4.6 mm ± 0.2 mm |
| Cable - Bending radius | > 10 x cable diameter |
| Материал | PVC |
| Cable - Color | grey |
| Cable - Number of cores | 3 |
| Cable - Core cross section | 0.34 mm2 |
| Cable - Length | 2 m |
| Mass | 146 g |
| Dimensions - Length | 57 mm |
| Dimensions - Diameter | 18 mm |