Pepperl+Fuchs SE NCB1,5-8GM40-Z1
Inductive sensor
Категории:
Технические характеристики
| Switching function | Normally closed (NC) |
|---|---|
| Output type | Two-wire |
| Rated operating distance | 1.5 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 1.21 mm |
| Actual operating distance | 1.35 ... 1.65 mm typ. |
| Reduction factor rAl | 0.22 |
| Reduction factor rCu | 0.16 |
| Reduction factor r304 | 0.64 |
| Напряжение питания | 5 ... 60 V |
| Switching frequency | 0 ... 1200 Hz |
| Hysteresis | 1 ... 10 % typ. 5 % |
| Reverse polarity protection | reverse polarity tolerant |
| Short-circuit protection | pulsing |
| Напряжение питания | ≤ 5 V |
| Operating current | 2 ... 100 mA |
| Lowest operating current | 2 mA |
| Off-state current | 0 ... 0.5 mA typ. |
| Switching state indicator | LED, yellow |
| MTTFd | 2772 a |
| Diagnostic Coverage (DC) | 0 % |
| Standard conformity - Standards | EN IEC 60947-5-2 |
| UL approval | cULus ListedLoad Type: General PurposeCircuitry: Class 2 Power SourceEnclosure Type Rating: Type 1Supply/Switching Voltage: 60 V DCOutput Switching Current: 100 mA |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Рабочая температура | -25 ... 70 °C (-13 ... 158 °F) |
| Connection type | cable |
| Материал | Stainless steel 1.4305 / AISI 303 |
| Sensing face | LCP |
| Degree of protection | IP67 |
| Cable - Wire end ferrules | yes |
| Cable - Cable diameter | 2.8 mm ± 0.1 mm |
| Cable - Bending radius | > 10 x cable diameter |
| Материал | PUR |
| Cable - Color | black |
| Cable - Number of cores | 2 |
| Cable - Core cross section | 0.14 mm2 |
| Cable - Length | 2 m |
| Dimensions - Length | 40 mm |
| Dimensions - Diameter | 8 mm |