Pepperl+Fuchs SE NCB40-FP-A2-P1-V1
Inductive sensor
Категории:
Технические характеристики
| Switching function | complementary |
|---|---|
| Output type | PNP |
| Rated operating distance | 40 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 32.4 mm |
| Reduction factor rAl | 0.25 |
| Reduction factor rCu | 0.23 |
| Reduction factor r304 | 0.85 |
| Напряжение питания | 10 ... 60 V |
| Switching frequency | 0 ... 80 Hz |
| Hysteresis | typ. 3 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Напряжение питания | ≤ 3 V |
| Operating current | 0 ... 200 mA |
| Off-state current | 0 ... 0.5 mA |
| No-load supply current | ≤ 20 mA |
| Time delay before availability | ≤ 300 ms |
| Напряжение питания | LED, green |
| Switching state indicator | LED, yellow |
| MTTFd | 630 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standard conformity - Standards | EN IEC 60947-5-2 |
| UL approval | cULus ListedLoad Type: ResistiveCircuitry: Class 2 Power SourceEnclosure Type Rating: Type 1Supply/Switching Voltage: 60 V DCOutput Switching Current: 200 mA |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Рабочая температура | -25 ... 70 °C (-13 ... 158 °F) |
| Connection type | Connector plug |
| Материал | PBT |
| Sensing face | PBT |
| Housing base | PBT |
| Degree of protection | IP68 |
| Connector - Threading | M12 x 1 |
| Connector - Number of pins | 4 |
| Dimensions - Height | 40 mm |
| Dimensions - Width | 80 mm |
| Dimensions - Length | 80 mm |