Pepperl+Fuchs SE NCN50-FP-A2-P1-3G-3D
Inductive sensor
Категории:
Технические характеристики
| Switching function | complementary |
|---|---|
| Output type | PNP |
| Rated operating distance | 50 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 40.5 mm |
| Reduction factor rAl | 0.4 |
| Reduction factor rCu | 0.3 |
| Reduction factor r304 | 0.85 |
| Напряжение питания | 10 ... 60 V DC |
| Switching frequency | 0 ... 80 Hz |
| Hysteresis | typ. 3 % |
| Reverse polarity protection | reverse polarity protected |
| Напряжение питания | ≤ 3 V |
| Operating current | 0 ... 200 mA |
| Off-state current | 0 ... 0.5 mA |
| No-load supply current | ≤ 20 mA |
| Time delay before availability | ≤ 300 ms |
| Напряжение питания | LED, green |
| Switching state indicator | LED, yellow |
| MTTFd | 671 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standard conformity - Standards | EN IEC 60947-5-2 |
| IECEx approval - Equipment protection level Gc (ec) | IECEx TUR 21.0019X |
| IECEx approval - Equipment protection level Dc (tc) | IECEx TUR 21.0020X |
| ATEX approval - Equipment protection level Gc (ec) | TÜV 20 ATEX 8525 X |
| ATEX approval - Equipment protection level Dc (tc) | TÜV 20 ATEX 8526 X |
| UL approval | cULus ListedLoad Type: General PurposeCircuitry: Class 2 Power SourceEnclosure Type Rating: Type 1Supply/Switching Voltage: 60 V DCOutput Switching Current: 200 mA |
| CCC approval - Hazardous Location | 20243223150059622024322315005982 |
| Рабочая температура | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type | screw terminals |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection!tightening torque 1.2 Nm + 10 % |
| Core cross section | up to 2.5 mm2, stripped insulation length: 7 mm |
| Minimum core cross-section | min. 0.5 mm2(incl. wire-end ferrules when using flexible conductors) |
| Maximum core cross-section | max. 2.5 mm2(incl. wire-end ferrules when using flexible conductors) |
| Connection (system side) | screw terminals , M20 x 1.5 cable gland , usable thread length 10 mm , screw-in depth max. 10 mm |
| Материал | PBT |
| Sensing face | PBT |
| Housing base | PBT |
| Degree of protection | IP67 |
| Mass | 440 g |
| Tightening torque, housing screws | 1 Nm |
| Dimensions - Height | 40 mm |
| Dimensions - Width | 80 mm |
| Dimensions - Length | 80 mm |
| Use in the hazardous area | see instruction manuals |