Pepperl+Fuchs SE NMB10-18GM55-E2-355MM-4DT06
Inductive sensor
Категории:
Технические характеристики
| Switching function | Normally open (NO) |
|---|---|
| Output type | PNP |
| Rated operating distance | 10 mm |
| Installation | flush (Requirements: see drawing below) |
| Output polarity | DC |
| Assured operating distance | 0 ... 8.1 mm |
| Actuating element | Ferrous and nonferrous targets |
| Reduction factor rAl | 0.4 |
| Reduction factor rCu | 0.25 |
| Reduction factor r304 | 0.85 |
| Reduction factor rSt37 | 1 |
| Напряжение питания | 10 ... 30 V DC |
| Switching frequency | 0 ... 240 Hz |
| Hysteresis | 3 ... 15 typ. 10 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Напряжение питания | ≤ 2 V |
| Operating current | ≤ 200 mA |
| Off-state current | 10 µA |
| No-load supply current | ≤ 10 mA |
| Напряжение питания | LED, green |
| Switching state indicator | LED, yellow |
| MTTFd | 847 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standard conformity - Standards | EN IEC 60947-5-2 |
| Рабочая температура | -25 ... 70 °C (-13 ... 158 °F) |
| Connection type | fixed cable with plug |
| Core cross section | 0.5 mm2 |
| Материал | Stainless steel 1.4305 / AISI 303 |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Degree of protection | IP67 |
| Connector - Connection assembly | Deutsch connector DT06-4S-C015Deutsch contact 1062-16-0622Deutsch plug 114017Deutsch wedge W4S |
| Cable - Cable diameter | 6.2 mm ± 0.2 mm |
| Cable - Bending radius | > 10 x cable diameter |
| Материал | PUR |
| Cable - Color | black |
| Cable - Number of cores | 3 |
| Cable - Length | L = 325 mm |
| Dimensions - Length | 55 mm |
| Dimensions - Diameter | 18 mm |
| Mounting | with nuts, M18 |
| Note | Deutsch connector |
| Scope of delivery | 2 self locking nuts in scope of delivery |