Pepperl+Fuchs SE NSN4-12GH50-2E2-M1-S2D2
Inductive sensor
Категории:
Технические характеристики
| Switching function | 2 x normally open (NO) |
|---|---|
| Output type | PNP |
| Rated operating distance | 4 mm |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 3.24 mm |
| Actuating element | Reference target according EN IEC 60947-5-2 (FE360 - ST37K)12 mm x 12 mm x 1 mm |
| Reduction factor rAl | 0.55 |
| Reduction factor rCu | 0.5 |
| Reduction factor r304 | 0.9 |
| Reduction factor rBrass | 0.6 |
| Напряжение питания | 10 ... 30 V |
| Напряжение питания | 12 ... 24 V |
| Switching frequency | 0 ... 30 Hz |
| Hysteresis | typ. 5% |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Overload resistance | yes |
| Напряжение питания | ≤ 3 Vat IL(sum of all outputs) max. 50 mA |
| Напряжение питания | 30 V |
| Operating current | 1 ... 30 mA per output |
| Off-state current | 0 ... 0.5 mA |
| No-load supply current | ≤ 15 mA |
| Time delay before availability | ≤ 300 ms |
| Switching state indicator | LED, yellow |
| Error indicator | LED, red |
| Safety Integrity Level (SIL) | SIL 2 |
| Performance level (PL) | PL d |
| Category | Cat. 2 |
| MTTFd | > 7500 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | min. 60 % |
| Assured release distance of a PDDB | 6 mm |
| Standard conformity - Standards | EN IEC 60947-5-2:2007EN IEC 60947-5-3:2013EN ISO 13849-1:2015EN IEC 61508:2010EN IEC 62061:2021compatible with EN ISO 61131-2:2007 Typ 1, 2, 3 |
| UL approval | cULus ListedLoad Type: General PurposeCircuitry: Class 2 Power SourceEnclosure Type Rating: Type 1Supply/Switching Voltage: 24 V DCOutput Switching Current: 2 x 30 mA |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| E1 Type approval | 10R-06 |
| Рабочая температура | -40 ... 85 °C (-40 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Altitude | ≤ 5000 m above MSL |
| Connection type | cable |
| Материал | Stainless steel 1.4404 / AISI 316L |
| Sensing face | PBT |
| Degree of protection | IP68 / IP69 |
| Cable - Wire end ferrules | yes |
| Cable - Cable diameter | 4.8 mm ± 0.15 mm |
| Cable - Bending radius | > 10 x cable diameter |
| Материал | PUR |
| Cable - Color | black |
| Cable - Number of cores | 4 |
| Cable - Core cross section | 0.5 mm2 |
| Cable - Length | 2 m |
| Mass | 91 g |
| Dimensions - Length | 60 mm |
| Dimensions - Diameter | 12 mm |
| Scope of delivery | Supplied with 2 nuts |