Pepperl+Fuchs SE OBD450-18GM40A-E0
Diffuse mode sensor
Категории:
Технические характеристики
| Detection range | 0 ... 450 mm |
|---|---|
| Detection range min. | 0 ... 30 mm |
| Detection range max. | 0 ... 450 mm |
| Adjustment range | 30 ... 450 mm |
| Reference target | standard white 200 mm X 200 mm |
| Light source | LED |
| Light type | modulated visible red light |
| Diameter of the light spot | approx. 30 mm at 450 mm |
| Opening angle | approx. 2.6 ° |
| Optical face | lateral |
| Ambient light limit | EN 60947-5-2 20000 Lux |
| Hysteresis | < 15 % |
| MTTFd | 1289 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Operation indicator | LED green:on - power onflashing (4 Hz) - short circuit |
| Function indicator | LED yellow:constantly on - object detectedconstantly off - object not detected |
| Control elements | sensitivity adjustment |
| Напряжение питания | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 25 mA |
| Protection class | III |
| Switching type | Q - Pin4: NPN normally open / light-on |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector |
| Напряжение питания | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Напряжение питания | ≤ 1.5 V DC |
| Switching frequency | 500 Hz |
| Время отклика | ≤ 1 ms |
| Product standard | EN 60947-5-2 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Рабочая температура | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP67 |
| Connection | 2 m fixed cable |
| Материал | brass, nickel-plated |
| Материал | PMMA |
| Материал | PVC |
| Mass | approx. 62 g |
| Dimensions - Length | 53.4 mm |
| Dimensions - Diameter | 18 mm |
| Dimensions - Thread size | M18 |