Pepperl+Fuchs SE OBR10M-R202-E2-V1-4R-SET
Retroreflective sensor
Категории:
Технические характеристики
| Effective detection range | 0 ... 10 m |
|---|---|
| Reflector distance | 0.05 ... 10 m |
| Threshold detection range | 12 m |
| Reference target | H85-2 reflector |
| Light source | LED |
| Light type | modulated visible red light |
| LED risk group labelling | exempt group |
| Polarization filter | yes |
| Diameter of the light spot | approx. 300 mm at a distance of 10 m |
| Opening angle | 2 ° |
| Ambient light limit | EN 60947-5-2 : 60000 Lux |
| MTTFd | 876 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Operation indicator | LED green:on - power onflashing (4 Hz) - short circuit |
| Function indicator | Yellow LED:Permanently lit - light path clearPermanently off - object detectedFlashing (4 Hz) - insufficient operating reserveFlashing (8 Hz) - fault detected, the outputs maintain the status |
| Напряжение питания | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 30 mA at 24 V Operating voltage |
| Protection class | III |
| Switching type | Q - Pin4: PNP normally open / dark-on |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Напряжение питания | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Usage category | DC-12 and DC-13 |
| Напряжение питания | ≤ 1.5 V DC |
| Switching frequency | 1000 Hz |
| Время отклика | 0.5 ms |
| Product standard | EN 60947-5-2 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Рабочая температура | -30 ... 60 °C (-22 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP67 |
| Connection | 4-pin, M12 x 1 connector |
| Материал | PC (Polycarbonate) |
| Материал | PMMA |
| Mass | approx. 55 g |
| Dimensions - Height | 61.9 mm |
| Dimensions - Width | 20 mm |
| Dimensions - Depth | 41.7 mm |