Pepperl+Fuchs SE OBR5000-18GM60A-E5-V1
Retroreflective sensor
Категории:
Технические характеристики
| Effective detection range | 0 ... 5 m |
|---|---|
| Reflector distance | 0 ... 5 m |
| Threshold detection range | 7 m |
| Reference target | reflector C110-2 |
| Light source | LED |
| Light type | modulated visible red light |
| Polarization filter | yes |
| Diameter of the light spot | approx. 270 mm at 5 m |
| Opening angle | approx. 2.6 ° |
| Optical face | lateral |
| Ambient light limit | EN 60947-5-2 20000 Lux |
| MTTFd | 962 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Operation indicator | LED green:on - power onflashing (4 Hz) - short circuit |
| Function indicator | Yellow LED:Permanently lit - light path clearPermanently off - object detectedFlashing (4 Hz) - insufficient operating reserve |
| Control elements | light/dark on electrically switchable |
| Напряжение питания | 10 ... 30 V DC |
| Ripple | max. 10 % |
| No-load supply current | < 25 mA |
| Protection class | III |
| Switching type | The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP output / dark-on L/D-On - Pin2: Low-active input |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
| Напряжение питания | max. 30 V DC |
| Switching current | max. 100 mA , resistive load |
| Напряжение питания | ≤ 2 V DC |
| Switching frequency | 500 Hz |
| Время отклика | ≤ 1 ms |
| Product standard | EN 60947-5-2 |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Рабочая температура | -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Degree of protection | IP67 |
| Connection | 4-pin, M12 x 1 connector |
| Материал | brass, nickel-plated |
| Материал | PMMA |
| Материал | plastic |
| Mass | approx. 24 g |
| Dimensions - Length | 78.5 mm |
| Dimensions - Diameter | 18 mm |
| Dimensions - Thread size | M18 |