Pepperl+Fuchs SE UB800-18GM40A-E5-610MM-Y
Ultrasonic sensor
Категории:
Технические характеристики
| Sensing range | 50 ... 800 mm |
|---|---|
| Adjustment range | 70 ... 800 mm |
| Dead band | 0 ... 50 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 255 kHz |
| Response delay | approx. 100 ms |
| LED green | Power on |
| LED yellow | indication of the switching stateflashing: program function object detected |
| LED red | solid red: Errorred, flashing: program function, object not detected |
| Напряжение питания | 10 ... 30 V DC |
| No-load supply current | ≤ 20 mA |
| Input type | 1 program inputoperating distance 1: -UB... +1 V, operating distance 2: +6 V ... +UBinput impedance: > 4,7 kΩ program pulse: ≥ 1 s |
| Output type | 1 switching output E5, PNP NO/NC, programmable |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Default setting | Switch point A1: 70 mm Switch point A2: 800 mm |
| Напряжение питания | ≤ 3 V |
| Repeat accuracy | ≤ 1 % |
| Switching frequency | ≤ 4 Hz |
| Range hysteresis | 1 % of the set operating distance |
| Temperature influence | ± 1.5 % of full-scale value |
| Standard conformity - Standards | EN IEC 60947-5-2:2020IEC 60947-5-2:2019 |
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Рабочая температура | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type | cable |
| Degree of protection | IP67 |
| Материал | brass, nickel-plated |
| Материал | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Cable - Sheath diameter | 4.8 mm |
| Cable - Bending radius | > 38.4 mm , fixed installation> 72 mm , movable installation |
| Материал | PVC |
| Cable - Number of cores | 4 |
| Cable - Core cross section | 4 x 0.5 mm2 |
| Cable - Length | 610 mm |
| Mass | 65 g |
| Dimensions - Length | 69 mm |
| Dimensions - Diameter | 18 mm |
| Scope of delivery | Deutsch connector DT04-4P-CE01Deutsch wedge W4PGerman contact 0460-202-1631 |