Pepperl+Fuchs SE UMB800-18H40-I-2M
Ultrasonic sensor
Категории:
Технические характеристики
| Sensing range | 70 ... 800 mm |
|---|---|
| Adjustment range | 90 ... 800 mm |
| Dead band | 0 ... 70 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 170 kHz |
| Response delay | approx. 100 ms |
| Напряжение питания | 10 ... 30 V DC |
| No-load supply current | ≤ 15 mA |
| Input type | 1 program inputoperating distance 1: -UB... +1 V, operating distance 2: +6 V ... +UBinput impedance: > 4,7 kΩ program pulse: ≥ 1 s |
| Output type | 1 analog output 4 ... 20 mA , overload-protected |
| Resolution | 0.4 mm at max. sensing range |
| Deviation of the characteristic curve | ± 1 % of full-scale value |
| Repeat accuracy | ± 0.5 % of full-scale value |
| Load impedance | 0 ... 300 Ω at UB> 10 V;0 ... 500 Ω at UB> 15 V |
| Temperature influence | ± 1.5 % of full-scale value |
| Standard conformity - Standards | EN IEC 60947-5-2:2020IEC 60947-5-2:2019EN 60947-5-7:2003IEC 60947-5-7:2003 |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Рабочая температура | -25 ... 85 °C (-13 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Connection type | cable PUR , 2 m , Polyether based |
| Core cross section | 4 x 0.19 mm2 |
| Degree of protection | IP68 / IP69K |
| Материал | Stainless steel 1.4404 / AISI 316L |
| Материал | Stainless steel 1.4435 / AISI 316L |
| Материал | Cable seal : TPU , Elastollan 1185 A10 |
| Mass | 90 g |
| Dimensions - Length | 55 mm |
| Dimensions - Diameter | 18 mm |
| Output | evaluation limit A1: 90 mmevaluation limit A2: 800 mmOutput mode: rising ramp |